Product Information for S-390 Shinekeeper Floor Polish

S-390 Shinekeeper Floor Polish
Maintenance \ Residential Floor Care Products\S-390 Shinekeeper Floor Polish

Installation

	Use:	Residential
		Use For: All Armstrong residential semi to high gloss vinyl and linoleum floors Asphalt tile Rubber tile (not Crowne Disc) Ceramic - although not much value on glazed ceramic; unglazed - other products designed for this use will produce better results Slate and terrazzo - other products designed for this use will produce better results Do Not Use For: Wood or marble

Description

Spread Rate:	500 - 750 sq ft per quart
Advantages:	Restores the shine to floors - even older floors Resists harsh detergents No buffing necessary Metal cross-linked acrylic copolymer Resists scuffing and water-spotting Available in quarts and 1/2 gallons pH of 8.6 18% solids
Shelf Life:	Two years if not opened. Keep from freezing.
Available Units:	1/2 Gallon - 64 fl oz (1.9 L); 8 1/2 gal (plastic)/ctn; Weight 38 lbs/ctn (17.3 kg/ctn) Item Number: 1/2 Gallon - 00390806 UPC Information: 1/2 Gal - UPC 0-42369-33353-5
VOC:	VOC content: 187 g/L calculated at 70^oF/21^oC, SCAQMD 1168

Sold at: 84 Lumber, Home Depot, Lowes, Menards, Sherwin-Williams, TrueValue

NOTE: Keep from freezing.

FLOOR PREP:

Sweep or vacuum thoroughly
Wash with Armstrong Once 'n Done Floor Cleaner (Do not use Once 'n Done on linoleum, use S-730 Linoleum Floor cleaner instead)
Let dry

APPLYING POLISH:

Pour polish into a clean bucket (never pour polish directly onto floor)
Apply a thin coat with a clean damp sponge mop or wax applicator
Make sure the entire surface is coated
Dries in approximately 30 minutes - no buffing necessary

ONGOING POLISHING:

Reapply Shinekeeper Floor Polish as needed - 1 or 2 coats at a time
If necessary, remove Shinekeeper with Armstrong New Beginning Floor Stripper & Cleaner. Note: Armstrong New Beginning Floor Stripper & Cleaner can not be used on linoleum to remove the Shinekeeper. Use S-795 Linoleum Stripper instead.

HOUSEHOLD HINT:

In high humidity areas, Shinekeeper may take longer than 30 minutes to dry

NOTE: Do not reuse container. Dispose of container and residue in accordance with federal, state and local waste disposal regulations. Do not flush Shinekeeper residue down drains.

Read label and MSDS carefully before use.

Products