Product Information for S-385 Satinkeeper Low Gloss Floor Finish

S-385 Satinkeeper Low Gloss Floor Finish
Maintenance \ Residential Floor Care Products\S-385 Satinkeeper Low Gloss Floor Finish

Installation

	Use:	Residential
		Use For: To preserve the low gloss appearance of all ultra low gloss, low gloss and semi gloss Armstrong residential vinyl sheet, vinyl tile, and linoleum flooring. Do Not Use For: Hardwood, laminate, cork or marble floors or high gloss vinyl flooring

Description

Spread Rate:	1 coat per quart covers 375 - 500 sq ft. Two coats per quart covers 187 - 250 sq ft.
Advantages:	Renews worn or dulled floors Protects floor from scuffs, scratches and dirt Does not require buffing Resists harsh detergents Metal cross-linked acrylic copolymer Resists scuffing and water-spotting Available in quarts pH of 8.6 18% solids
Shelf Life:	One year if not opened. Keep from freezing.
Available Units:	Quart - 32 fl oz (946 ml); 6 qts (plastic)ctn; Weight 14 lbs/ctn (6.4 kg/ctn) (1/2 Gallon - 64 fl. oz. (1900 ml); 8 containers(plastic) per carton - Discontinued 2007) Item Number: Quart - 00385601; (1/2 Gallon - 00385806 - Discontinued 2007) UPC Information: Quart UPC - 0-42369-37258-9; (1/2 Gallon UPC - 0-42369-52091-8 Discontinued 2007)
VOC:	Not Applicable

NOTE: Keep from freezing.

FLOOR PREP:

Sweep or vacuum thoroughly
Wash with Armstrong Once 'n Done Floor Cleaner (Do not use Once 'n Done on linoleum, use S-730 Linoleum Floor Cleaner instead)
Let dry

APPLYING POLISH:

Initially, apply two thin coats with a clean damp sponge mop or wax applicator and allow at least 30 minutes drying time between coats
Make sure the entire surface is coated
Dries in approximately 30 minutes - do not buff

ONGOING POLISHING:

Reapply Satinkeeper Floor Finish as needed - 1 or 2 coats at a time
If necessary, remove Satinkeeper with Armstrong New Beginning Floor Stripper & Cleaner. Note: Armstrong New Beginning Floor Stripper & Cleaner can not be used on linoleum to remove the Satinkeeper. Use S-795 Linoleum Stripper instead.

HOUSEHOLD HINT:

In high humidity areas, Satinkeeper may take longer than 30 minutes to dry

NOTE: Do not reuse container. Dispose of container and residue in accordance with federal, state and local waste disposal regulations. Do not flush Satinkeeper residue down drains.

Read label and MSDS carefully before use.

Products