Public Knowledge Base
Contact Armstrong Flooring

Search

Home > Knowledge Search >
Back to Results

National Average Installed Cost per Square Foot - Commercial Products

« Go Back
Information
Prices are approximations only. Actual prices will vary based on job conditions and local labor cost. Estimated prices include material and labor figured on a 500 sq. ft. (46.45 m2 ) open area installation without any specific cuttings or special subfloor preparation.

National Average Installed Cost per Square Foot
 
PRODUCTSTHICKNESSUS DOLLARSCANADIAN DOLLARS
LVT
Natural Creations®
with Diamond 10® Technology Coating
0.125 in.
(3.2 mm)
$5.00 – $5.50$5.50 – $6.25
Vivero™ Best0.100 in.
(2.5 mm)
$4.75 – $5.25$5.25 – $6.00
Vivero™ Best Locking0.160" (4 mm)$6.25 - $6.75$7.00 - $7.75
Vivero™ Better0.080 in.
(2.0 mm)
$4.00 – $4.25$4.25 – $4.75
Vivero™ Better Locking0.160" (4 mm) $5.25 - $6.00$6.00 - $6.50
Natural Creations® Classics0.125 in.
(3.2 mm)
$4.50 – $5.00$5.00 – $5.50
Natural Creations®
with I-Set® Installation System
0.160 in.
(4.0 mm)
$5.00 – $5.50$5.50 - $6.00
Parallel® 200.100 in.
(2.5 mm)
$3.75 – $4.00$4.00 – $4.50
Parallel® 120.080 in.
(2.0 mm)
$3.25 – $3.50$3.50 – $3.75
HETEROGENEOUS SHEET
DecorArt® Rejuvenations™
with Diamond 10® Technology coating
0.080 in.
2.0 mm) 
$4.50 – $5.25 $5.25 – $6.00
DecorArt® Rejuvenations™ Classics0.080 in.
2.0 mm) 
$4.00 – $4.75$4.50 – $5.25
DecorArt® Abode®0.080 in.
(2.0 mm)
$2.75 – $3.25 $3.25 – $3.50
DecorArt® Possibilities®0.080 in.
(2.0 mm) 
$3.75 – $4.25 $4.00 – $4.75
DecorArt® Corlon®
0.080 in.
(2.0 mm)
$2.75 – $3.25 $3.25 – $3.50
HOMOGENEOUS SHEET
ColorArt® Medintone™
with Diamond 10® Technology coating
0.080 in.
(2.0 mm) 
$4.00 – $4.75$4.50 – $5.25
ColorArt® Medintech®
with Diamond 10® Technology coating
0.080 in.
(2.0 mm)
$4.00 – $4.75$4.50 – $5.25
ColorArt® Accolade Plus™0.080 in.
(2.0 mm)
$3.25 – $3.75$3.75 – $4.25
BIO BASED TILE
Striations BBT™
with Diamond 10® Technology Coating 
1/8 in.
(3.2 mm) 
$4.75 - $5.25$5.50 – $6.00
Migrations BBT™
with Diamond 10® Technology Coating
1/8 in.
(3.2 mm)
$5.00 - $5.25$5.50 - $6.00
VCT
Premium Excelon® Crown Texture™1/8 in.
(3.2 mm)
$3.75 – $4.25$4.25 – $4.75
Premium Excelon® Raffia® Stream™
with Diamond 10® Technology coating
1/8 in.
(3.2 mm)
$4.25 - $4.75$4.75 - $5.25
Premium Excelon® ChromaSpin™1/8 in.
(3.2 mm)
$4.00 – $4.25$4.25 – $4.75
Premium Excelon® Stonetex®1/8 in.
(3.2 mm)
$4.00 – $4.50$4.50 – $5.00
Premium Excelon® Companion Square®1/8 in.
3.2 mm)
$3.75 – $4.00$4.25 – $4.50
Premium Excelon® Feature™ Tile, Strips & Insets - Black1/8 in.
(3.2 mm)
$5.25 – $5.75$5.75 – $6.50
Premium Excelon® Feature™ Tile, Strips & Insets - Colors1/8 in.
(3.2 mm)
$5.50 – $6.00$6.00 – $6.75
Standard Excelon® Imperial® Texture
with Diamond 10® Technology Coating
1/8 in.
(3.2 mm)
$2.50 – $3.00$2.75 - $3.25
Standard Excelon® Imperial® Texture1/8 in.
(3.2 mm)
$2.00 – $2.50$2.25 – $2.75
Standard Excelon® MultiColor™
with Diamond 10® Technology Coating
1/8 in.
(3.2 mm)
$2.50 – $3.00$2.75 - $3.25
Standard Excelon® MultiColor™1/8 in.
(3.2 mm)
$2.00 – $2.50$2.25 – $2.75
SRF (SHEET)
Safety Zone™0.080 in.
(2.0 mm)
$5.50 – $6.25$6.25 – $7.25
SRF/ESD (TILE)
Safety Zone™1/8 in.
3.2 mm)
$5.00 – $6.00$5.75 – $6.75
Excelon® SDT™1/8 in.
(3.2 mm)
$7.75 – $8.75$8.75 – $10.00
Rigid Core
Pryzm6.5 mm$7.00 – $7.75$7.75 – $8.75
Luxe with Rigid Core0.3150" (8 mm)$5.25 – $5.75$5.75 – $6.50
Rigid Core Elements0.2" (5 mm) with attached backing$4.75 – $5.25$5.25 – $5.75
Unleashed.200" (5.0 mm)$4.75 – $5.25$5.25 – $6.00
Vantage0.23" (6mm)$5.50 – $6.00$6.25 – $7.00
 
Additional Information
No additional information for this field.
Additional Information
No additional information for this field.
Additional Information
No additional information for this field.
Attachments