Armstrong Flooring Commercial Luxury Flooring Installation Instructions For Use With Natural Creations with Diamond 10 Technology (see attachment at bottom for Natural Creations D10 Grocery Store Tip...
Layout and Fitting of Resilient Tile 1. Square Layout Methods for laying out the room are the same for all kinds of resilient tile. However, there...
Residual Adhesives on Concrete Slabs to Receive Resilient Flooring For Installations of Armstrong Flooring Products Precautions Some previously manufactured asphaltic “cutback” adhesives contained asbestos. For removal instructions, refer to the Resilient Floor Covering Institute’s publication...
Armstrong Flooring Commercial and Residential Adhesive Summary Commercial Adhesive Summary Table Key: Primary Recommendation:(As Recommended on Product Data Sheet) Compatible: For Use With Certain Products and/or Applications....
Armstrong Flooring Commercial Tile Installation System For Vinyl Composition Tile (VCT) Commercial Tile Installation Instructions For Use With Type Collection & Design Full SpreadS-515 S-1000* S-319* Flip Spray Adhesive VCT Raffia®...
Adhesive Bond Test It is recommended this test be used to determine the compatibility of resilient flooring adhesives to concrete subfloors after removal...
Armstrong Flooring Installation System For Excelon Static Dissipative Tile (SDT) Static Dissipative Tile Installation Instructions Precaution CAUTION: Both the SDT and the S-202 Adhesive contain a small amount of quaternary ammonium compound. For...
Armstrong Flooring Engineered Tile Installation Engineered Tile Installation For Use With Product Gauge Size Adhesive Comment Alterna 0.160″ (4.1mm) 8″ x 16″ (20.3 cm x...
Armstrong Flooring Do-It-Yourself Tile Installation System Key Points When installing over an existing resilient floor, lay out the installation so the new seams are a minimum...
Armstrong Flooring Seam Cutting Methods For Sheet Flooring Seam cutting is one of the most important aspects of flooring installation. It is relatively easy to repair miscuts when...