Product Information

Traffic Type: Commercial
Overall Thickness: 0.125″ (3.2 mm)
Width x Length: See Table Below
Gloss: Low
Texture: See Table Below
Manufacturing Location: USA

Warranty

5 Year Commercial Limited Warranty

Product Features

• Stair treads are available in 4 and 6 feet lengths
• Stair treads are made of a thermoplastic rubber formulation

The texture, be it raised round or hammered, extends to approximately 10” back from the nose. At approximately 11” the tread is thinner for a couple of inches to make it easier to bend it from horizontal to vertical in order to climb the riser of the stair.

REFERENCE SPECIFICATIONS:
Integrated Stair Tread – ASTM F 2169 (Type TP Class 2 Rubber, thermoplastic)

Testing

Attribute	Test Method	Requirement	Performance vs. Requirement
Composition of Materials	Certificate of Compliance	As specified	Meets
Wear Layer Thickness	ASTM F410	≥ 0.002”	Meets
Flexibility	ASTM F137	¼ inch mandrel – no cracks or breaks in wear surface	Meets
Staining of adjacent surfaces induced by wall base	ASTM F1861 Section 12	No staining of adjacent surfaces	Meets
Resistance to Light	ASTM F1515	Max. avg. ΔE ≤ 8	Meets
Dimensional Stability	ASTM F1861 Section 12	±0.25%	Meets
Chemical Resistance	ASTM F925	No more than slight change in surface dulling, attack or staining	Meets
Height	ASTM F1861 Section 9	As specified, ±1% of nominal height	Meets
Thickness	ASTM F386	As specified, 0.080 in. +0.015/ -0.005 in. 0.25 in. + 0.015/ -0.015 in.	Meets
Length	ASTM F1861 Section 9	As specified, no less than nominal value	Meets

Additional Testing	Test Method	Requirement	Performance vs. Requirement
Fire Test Data – Flame Spread	ASTM E648	0.45 W/cm2 or more Class 1	Meets
Fire Test Data – Smoke Evolution	ASTM E662	450 or less	Meets
Fire Resistance	ASTM E84	Class II (26 – 75)	Meets

Sustainability

FloorScore Certificates – Stair Treads & Landing Tile

SDS

Rubber Stair Treads/Risers/Tiles SDS

Installation

Integrated Stair Treads Installation System

Care and Maintenance

Maintenance Recommendations – Integrated Stair Tread and Landing Tile

Product Data Table

Product	Profile	Size	Feet per Carton	Pieces per Carton
Integrated Stair Treads	Hammered	20″ x 48.5″  (50.8 cm x 123.2 cm)	24 lin. ft.	6
Integrated Stair Treads	Hammered	20″ x 72.5 (50.8 cm x 184.2 cm)	24 lin. ft.	4
Integrated Stair Treads	Raised Round	20″ x 50.25″ (50. 8 cm x 127.6 cm)	24 lin. ft.	6
Integrated Stair Treads	Raised Round	20″ x 74.25″ (50.8 cm x 188.6ccm)	24 lin. ft.	4

Profile	Model Number	Suffix
Raised Round 4′	R4Cxx	018 – Standard 018T – Tactile Grip 018V – Visually Impaired
Hammered 4′	R4Hxx	018
Raised Round 6′	R6Cxx	018 – Standard 018T – Tactile Grip 018V – Visually Impaired
Hammered 6′	R6Hxx	018

Colors:

ES – Essential Sand	PB – Pebble	ML – Molasses
SW – Stone Wash	SG – Smokey Gray	EB – Ebony

Raised Round Stair Tread

Hammered Stair Tread

Stair Tread

Stair Tread with Tactile Grip Strip

Stair Tread with Visually Impaired Strip