ASTM F 1861 Resilient Wall Base

Summary

This specification is issued under the jurisdiction of ASTM International Committee F06 on Resilient Floor Coverings
For the complete text of this standard and other ASTM standards visit the ASTM website at www.astm.org or contact ASTM Customer Service at service@astm.org.

Scope

Covers resilient wall base manufactured from rubber or thermoplastic materials (or a combination thereof) used to provide a functional as well as a decorative border between walls and floors but not including rigid products.

Classification

Types:
Type TS – Rubber, Vulcanized Thermoset
Type TP – Rubber, Thermoplastic
Type TV – Vinyl, Thermoplastic

Groups:
Group 1 – Solid (homogeneous)
Group 2 – Layered (multiple layers)

Styles:
Style A – Straight
Style B – Cove
Style C – Butt-to

Typical Profiles of Wall Base

Corners: Where specified, both inside and outside 90° factory-made corners should be specified by style. Corners must meet the same height and thickness requirements as wall base. 

Physical Property Requirements Tests

  • Wear Layer Thickness
  • Flexibility
  • Staining of Adjacent Surfaces Induced by Wall Base
  • Resistance to Light
  • Resistance to Chemicals
  • Dimensional Stability
  • Height
  • Thickness
  • Length
  • Squareness

WALL BASE

Use: ResidentialCertified to ASTM F 1861Supersedes Certification to
Fed Spec SS-W-40A
Thermoplastic Rubber  Wall BaseType TP – Rubber, Thermoplastic
Group 1 – Solid (homogeneous)
Style B – Cove
Type 1 (Rubber), Style B
Use: Commercial and Light CommercialCertified to ASTM F 1861Supersedes Certification to
Fed Spec SS-W-40A
Coved Thermoplastic Rubber Wall BaseType TP – Rubber, Thermoplastic
Group 1 – Solid (homogeneous)
Style B – Cove
Type 1 (Rubber), Style B
Sculptured Thermoplastic Rubber Wall BaseType TP – Rubber, Thermoplastic
Group 1 – Solid (homogeneous)
Style A – Straight 
Type 1 (Rubber), Style A
Updated on October 26, 2022