Product Information
Traffic Type: Commercial
Overall Thickness: 2.0 mm (0.080″)
Wear Layer: 10 mil
Visual: See Table Below
Finish: Urethane
Gloss: Low
Face Treatment: Embossed
Edge/End Treatment: Square Edges / Square Ends
Manufacturing Location: China, Taiwan
Width x Length:
| 6″ x 36″ (15.3 cm x 91.4 cm) |
| 7.25″ x 48″ (18.4 cm x 121.9 cm) |
Warranty
Product Features
- See the Avara Floor & Wall collection at ParterreFlooring.com
- Evoke a sense of comfort and tranquility with Avara 2mm luxury vinyl. Intended for both floor and wall applications, these versatile designs nurture relaxation with a vignette of home.
Testing
Avara products are ASTM E84 Class A fire rated for use on walls.
REFERENCE SPECIFICATION: ASTM F 1700, Class III, Type B – Embossed Surface
| Performance | Test Method | Requirement | Performance vs. Requirement |
| Thickness | ASTM F386 | Nominal ±0.005 in. | Meets |
| Size | ASTM F2055 | ± 0.016 in. per linear foot | Meets |
| Squareness | ASTM F2055 | 0.010 in. maximum | Meets |
| Residual Indentation | ASTM F1914 | Average less than 8% | Meets |
| Flexibility | ASTM F137 | ≤1.0 in., no cracks or breaks | Meets |
| Dimensional Stability | ASTM F2199 | 0.020 in./lin. ft. | Meets |
| Static Coefficient of Friction/Slip | ASTM D2047 | ≤ 0.5 | Meets |
| Chemical Resistance | ASTM F925 | No more than slight change in surface dulling, attack or staining | Meets |
| Resistance to Heat | ASTM F1514 | ΔE ≤ 8 | Meets |
| Resistance to Light | ASTM F1515 | ΔE ≤ 8 | Meets |
| Static Load Resistance | ASTM F1914 | Avg. ≤ 8% | Meets |
| Fire Test Data – Flame Spread | ASTM E648 | 0.45 W/cm2 or more Class 1 | Meets |
| Fire Test Data – Smoke Evolution | ASTM E662 | ≤ 450 | Meets |
| Certified Low Emitting Product | LEED EQ4.3 | – | Meets |
| Certified Low Emitting Adhesive | LEED EQ4.1 | – | Meets |
| Indoor Air Quality – Product | FloorScore® | – | Meets |
| Indoor Air Quality – Adhesive | FloorScore® | – | Meets |
| Indoor Air Quality | CHPS 01350 | – | Meets |
Sustainability
FloorScore Certificates – Parterre Flooring Systems Vinyl Plank
Parterre LEED and WELL Credit Guides
| WELL v1 | Feature | Contributes | Contribution |
| Air | Feature 04 – VOC Reduction | ✓ | Tested and third party certified by FloorScore® as complying with CDPH v1.2 |
| Air | Feature 11 – Fundamental Material Safety | ✓ | Product is free of asbestos and added lead (Part 1) |
| Air | Feature 25 – Toxic Material Reduction | ✓ | Free of flame retardants (Part 2) and phthalates (Part 3) |
| Mind | Feature 97 – Material Transparency | ✓ | Readily available Health Product Declaration® (HPD) to 1000 ppm |
| Mind | Feature 88 (Part 2) Biophilia I – Qualitative | ✓ | Products available that incorporate nature patterns |
| Mind | Feature 99 – Beauty and Design II | ✓ | Patterns and colors to aid in wayfinding and spatial familiarity (Part 3) |
| WELL v2 | Feature | Contributes | Contribution |
| Air | Feature X12 Short-Term Emission Control | ✓ | Adhesives associated with product are tested and third party certified by FloorScore as complying with CDPH v1.2 |
| Air | Feature X11 Long-Term Emission Control | ✓ | Flooring is tested and third party certified by FloorScore as complying with CDPH v1.2 |
| Air | Feature X01 Fundamental Material Precautions | ✓ | Product is free of asbestos |
| Materials | Feature X10 Volatile Organic Compound | ✓ | Free of flame retardants (Part 2) and phthalates (Part 3) |
| Materials | Feature X14 Material Transparency | ✓ | Readily available Health Product Declaration (HPD) to 1000 ppm |
| Mind | Feature M02 Access to Nature | ✓ | Products available that incorporate nature patterns |
| Community | Feature C13 (Part 2) Accessibility and Universal Design | ✓ | Patterns and colors to aid in wayfinding and spatial familiarity |
| LEED™ v4.1 | Contribution |
| BPDO – EPD | Product Specific |
| BPDO – Material Ingredient | HPD |
| Low Emitting Flooring | Tested and third party certified by FloorScore as complying with CDPH v1.2 |
| Low Emitting Adhesives | Tested and compliant to CDPH v1.2; Methylene Chloride and Perchloroethylene not intentionally added; FloorScore Certified |
| SCAQMD #1168 Compliant. Adhesives meet <50 g/L requirement | Parterre Universal – 0 g/L |
SDS
Installation
Commercial Dry Back Luxury Flooring Installation Instructions
Wall Instructions for Installation of LVT
Care & Maintenance
Commercial Resilient Maintenance Procedures
Product Data Table
| CARTON PROPERTIES | 6″ x 36″ Items | 7.25″ x 48″ Items |
| Pieces Per Carton | 36 | 16 |
| Area Per Tile | 1.5 sq ft (0.14 sq m) | 2.42 sq ft (0.22 sq m) |
| Coverage Per Carton | 54 sq ft (5.01 sq m) | 38.67 sq ft (3.59 sq m) |
| Carton Weight | 37 lbs (16.8 kg) | 30 lbs (13.6 kg) |
| PALLET PROPERTIES | 6″ x 36″ Items | 7.25″ x 48″ Items |
| Cartons Per Pallet | 50 | 48 |
| Coverage Per Pallet | 2700 sq ft (250.5 sq m) | 1856.16 sq ft (172.32 sq m) |
| Avara Pattern/Color | Model Number | Size |
| Kennett Chalk | R130A | 7.25″ x 48″ |
| Savannah Pine | R406 | 6″ x 36″ |
| Silva Oak | R412 | 6″ x 36″ |
| Kilise Oak | R415 | 6″ x 36″ |
| Tarkine Chestnut | R421 | 6″ x 36″ |
| Cumbria Beech | R600 | 6″ x 36″ |
| Lavallette Oak | R607 | 6″ x 36″ |
| Skyland Pine | R611 | 6″ x 36″ |
| Sonora Walnut | R631 | 6″ x 36″ |
| Lisbon Walnut | R634 | 6″ x 36″ |
| Beckett Maple | R645 | 6″ x 36″ |
| Surrey Oak | R663 | 6″ x 36″ |
| Etna Oak | R671 | 6″ x 36″ |
| Hampton Oak | R674 | 6″ x 36″ |
| Pier Oak | R677 | 6″ x 36″ |
| Halle Cedar | R682 | 6″ x 36″ |
| Malay Teak | R810 | 6″ x 36″ |
| Camilla Oak | R824 | 6″ x 36″ |
| Vienna Apple | R840 | 6″ x 36″ |
| Bonnet Mesquite | R864 | 6″ x 36″ |
| Moraine Walnut | R872 | 6″ x 36″ |
| Carolina Walnut | R874 | 6″ x 36″ |
| Fergana Walnut | R876 | 6″ x 36″ |
| Avara Pattern/Color | Model Number | Size |