Robbins Lisbon Impressions Porcelain Stone Tile DATA SHEET

Product Information

Traffic Type: Residential, Light Commercial, Commercial
Overall Thickness: 9.5 mm, 10.5 mm 
Finish: Unpolished (UPS), Exterior (EXT)
Manufacturing Location: USA

Dimensions:

Field Tile:(Rectified) 12″ x 24″, 24″ x 24″, 24″ x 48″
Mosaics2″ x 2″ Mosaic, Geometric Mosaic
Coordinating Trim6″ x 12″ Cove Base, 4″ x 24″ Single Bullnose

Warranty

Lifetime Residential Limited Warranty
1 Year Commercial Limited Warranty

Product Features

  • See the Lisbon Impressions collection at Robbins.com
  • Inspired by Portuguese Atlantic Dark limestone
  • The three hues in Lisbon Impressions color palette are a mix of warm and cool neutrals designed to coordinate with some of our best-selling collections
  • This line comes in interior and exterior finishes, for installations that flow from indoors to out
  • The textured exterior sizes, designed to an average minimum 0.60 DCOF and R11 classified, come in 12“ x 24”and 24” x 24”
  • The line’s distinct triangular mosaic opens many design possibilities for floors and walls along with a 2″ x 2″ mosaic
  • Complete your installations with 4″ x 24″ bullnose or 6″ x 12″ cove base

Testing

FeaturePerformanceTest Method
Water Absorption <0.50% ASTM C373
Breaking Strength >450 lbf ASTM C648
Bond Strength >200 psi ASTM C482
Frost Resistance Resistant ASTM C1026
Chemical Resistance Unaffected ASTM C650
Scratch Hardness 7Mohs Scale
Wet Dynamic Coefficient of Friction Range
UPS0.50 – 0.60ANSI A326.3
EXT (Textured)0.60 – 0.70ANSI A326.3

Shade & Texture Index

Lisbon Impressions has a shade variation of V2. Expect that the amount of color and texture on each piece may vary slightly.

Inspect the product upon delivery and for best results, blend tile from several cartons during installation.

Application Areas

Finish Interior Floors (dry) Interior Walls (wet/dry)Exterior WallsInterior Floors
(Standing water/
shower floors)
Exterior/Paving Pool/Fountain
Full Lining**
Water Line Pool/
Fountains
UPS  ✓Mosaics Only*N/A
EXT  ✓N/A ✓
**Excludes mesh mounted mosaics. Robbins recommends face mounted or edge mounted mosaics
for fully submerged applications. Contact your Robbins sales representative for more information.

NOTE: Trim applications will differ from field tile applications for the same series.

Recommended Use
Lisbon Impressions UPS is recommended for interior floors, interior walls, countertops, exterior walls, pool waterlines and full linings† in both residential and commercial applications. Lisbon Impressions UPS is not recommended for exterior horizontal surfaces or exterior paving. Lisbon Impressions EXT is recommended for exterior floors and walls in both residential and commercial applications.

† Excludes mesh mounted mosaics.

Wet area use for Mosaics
Robbins produces the Lisbon Impressions 2 x 2 and Robbins mosaics with the unpolished (UPS) finish. The ANSI A326.3 wet Dynamic COF of Lison Impressions is ≥0.42. Their small sizes ensure frequent grout joints which provides traction and drainage. Robbins cannot control situations involving incorrect installation, improper slope to the drain for elimination of standing water and poor surface cleaning.

This information is provided so that customers may make a realistic and informed decision
when comparing Lisbon Impressions to other tile products in wet area environments, such as
residential/commercial bathrooms, showers, and interior pool decks.

Sustainability

Green Squared certified
Health Product Declaration (HPD) – Porcelain Stone Tile
Environmental Product Declaration (EPD) – Porcelain Stone Tile
Declare Labels for Porcelain Stone Tile

Installation

Installation Guidelines – Porcelain Tile

Care and Maintenance

Cleaning & Maintenance For Porcelain Stone Tile Products

  • Use clean, hot water (combined with a household cleaner for more aggressive cleaning).
  • Rinse thoroughly and dry with a soft cloth.
  • No waxes are needed.

Product Data Table

Field Tile – Rectified
Nominal (in)Actual (mm)Thickness (mm)Grout Joint (mm)Finish
12 x 24297 x 5979.53UPS/EXT
24 x 24597 x 5979.53UPS/EXT
24 x 48597 x 119710.53UPS
Robbins recommends a grout joint of 3mm.
Actual measurements stated in inches indicate tile is calibrated (non-rectified).
Actual measurements stated in mm indicate tile is rectified.
Mosaics
Nominal (in)Sheet Size (mm)Thickness (mm)Grout Joint (mm)Finish
2 x 2 Mosaic*298 x 2989.52.5UPS
Geometric Mosaic*** 217 x 3729.52UPS
* Mounted on 298mm x 298mm sheet with 3mm grout joints (Coverage area 0.98 sf)
*** Mounted on 217mm x 372mm sheet with 2mm grout joints (Coverage area 0.58 sf)


† Due to this mosaic’s design, caution should be used when installing on surfaces that might contact bare skin or other delicate materials. To prevent possible injury or damage from sharp corners that might be exposed above the grout line, install per ANSI 108 guidelines in order to minimize or prevent lippage.
Coordinating Trim
Nominal (in)Actual (mm)Thickness (mm)Grout Joint (mm)Finish
6 x 12 Cove Base150 x 2979.53UPS
4 x 24 Single Bullnose96 x 5979.53UPS
FormatDescriptionClássica White
Model Number
Grand Rosé
Model Number
Castelo Fog
Model Number
Field TileUnpolished 12 x 24PT22443PT22448PT22453
Field TileExterior Textured 12 x 24PT12442PT12447PT12452
Field TileUnpolished 24 x 24PT24445PT24450PT24455
Field TileExterior Textured 24 x 24PT22444PT22449PT22454
Field TileUnpolished 24 x 48PT12446PT12451PT12456
Mosaic2 x 2PTG01.10202UMOSPTG02.10202UMOSPTG03.10202UMOS
MosaicGeometricPTG01.1CRSUMOSPTG02.1CRSUMOSPTG03.1CRSUMOS
Trim6 x 12 Cove BasePTG01.10612CBSPTG02.10612CBSPTG03.10612CBS
Trim4 x 24 Single BullnosePTG01.10424BNSPTG02.10424BNSPTG03.10424BNS
Updated on January 16, 2025

Article Attachments