Traffic Type: Residential, Light Commercial, Commercial
Overall Thickness: 1/2″ (1.3 cm)
Varying Length Range: 10″ – 72″ (25.4 cm – 182.9 cm)
Board Width: 7″ (17.8 cm)
Face Veneer Cut/Thickness: Sliced 2.0 mm
Species: White Oak
Finish: Urethane with Aluminum Oxide
Face Fill: Unfilled
Face Treatment: Wire Brushed
Edge/End Treatment: Micro Beveled Edges/Micro Beveled Ends
Manufacturing Location: USA
Installation Method Options:
Staple-Down*, Floating or Glue-Down
*Note: Do not staple down smooth traditionally finished Pecan, Maple or Hickory Products
All species of textured products (such as hand-scraped, wire-brushed, and rustic/distressed products ) can be stapled down with 20 gauge staples (1” minimum length for 3/8” – ½” engineered hardwood, for 9/16” hardwood, use 1-1/4” fasteners).
FOR PRODUCTS WIDER THAN 5˝: In addition to the use of mechanical fasteners, assisted glue applications should be used. The glue should be a premium grade urethane construction adhesive applied in a serpentine pattern to the back of each board. Then follow the recommended fastening pattern.
Premium underlayment labeled for use with floating engineered hardwood floors
Bruce Everseal Floating Floor Tongue & Groove Adhesive
Glue Down Adhesive:
Bruce Proconnect Plus Vapor Barrier Elastomeric Flooring Adhesive
Bruce Equalizer Pro Moisture-Cured Urethane Adhesive
Bruce Summit Select Unlimited Moisture Vapor Barrier Elastomeric Wood Flooring Adhesive
Blend Cartons For Best Appearance
Hardwood is a natural product and does not have dye lots. Floor should be installed from several cartons at the same time to ensure good color and shade mixture.
Care & Maintenance
Caring for Urethane Finish Hardwood Floors in a Residential Setting
Product Data Table
|Coverage Per Carton||24.5 sq ft (2.28 sq m)|
|Carton Weight||42 lbs (19.1 kg)|
|Cartons Per Pallet||40|
|Coverage Per Pallet||980 sq ft (91.2 sq m)|
Moldings are not offered for this collection.