Overlap Stairnose for 12mm, 10+2mm, and 8+2mm Laminate – Product and Installation

Overlap Stairnose for 12mm, 10+2mm, and 8+2mm laminate. Finishes the end of a landing when installing TimberTru plank.

Product Features

  • Used to finish the front edge of a landing
  • Surface material: Wear resistant laminate
  • Core material: Moisture resistant MDF

Materials and Tools:

  • Pencil
  • Tape measure
  • Saw
  • Hammer
  • Nail set
  • Urethane construction adhesive
  • Finish nails
  • Color coordinated filler

Installation Procedures

Step 1: Install the flooring leaving a 1-1/8” space from the end of the step for the step nose installation.

Step 2: Measure and trim to fit.

Step 3: Apply a generous bead of construction adhesive along the underside of the step nose.

Step 4: Leaving 1/8” space for expansion, carefully place the step nose against the front of the step, making sure the transition is in place. Press down firmly over the entire step nose. For added security, complete the installation with finish nails.

Product Dimensions

Length: 94″ (238.8 cm)

12mm, 10+2mm, and 8+2mm
Updated on December 14, 2022

Article Attachments