Overlap Stairnose for 8mm Laminate – Product and Installation

Overlap Stairnose for 8mm laminate finishes the end of a landing when installing 8mm TimberTru plank.

Product Features

  • Used to finish the front edge of a landing
  • Surface material: Wear resistant laminate
  • Core material: Moisture resistant MDF

Materials and Tools:

  • Pencil
  • Tape measure
  • Saw
  • Hammer
  • Nail set
  • Urethane construction adhesive
  • Finish nails
  • Color coordinated filler

Installation Procedures

Step 1: Install the flooring leaving a 1-3/8” space from the end of the step for the stairnose installation.

Step 2: Measure and trim to fit.

Step 3: Apply a generous bead of construction adhesive along the underside of the stairnose.

Step 4: Leaving 1/8” space for expansion, carefully place the stairnose against the front of the step, making sure the transition is in place. Press down firmly over the entire stairnose.
For added security, complete the installation with finish nails.

Product Dimensions

Length: 94″ (238.76 cm)

Updated on October 26, 2022

Article Attachments