Product Features

Covers the expansion space between the floor and a wall.
Used next to baseboards, case goods and stair steps.

Installation Procedures

1. Do not force Quarter Round against the floor.
2. Attach Quarter Round to the wall, not the floor.
3. DO NOT nail or drill into the molding. This will compromise the water resistant wear layer.
4. For best results, use an MS polymer adhesive. Cut the tip of the cartridge to create a 1/4″ opening at 45 degrees.
5. Applying the adhesive to the profile bottom allows for best control. Applying the adhesive directly to the wall is also acceptable.
6. Firmly press the profile against the wall, occasionally lifting the piece to ensure proper transfer is made to the bonding surface.
7. DO NOT nail or drill into the molding. This will compromise the water resistant wear layer.
8. For best results, use an MS polymer adhesive. Cut the tip of the cartridge to create a 1/4″ opening at 45 degrees.
9. Applying the adhesive to the profile bottom allows for best control. Applying the adhesive directly to the subfloor is also acceptable.
10. Firmly press the profile against the subfloor, occasionally lifting the piece to ensure proper transfer is made to the bonding surface.
11. Avoid traffic on the area until the adhesive has cured.

Product Structure

Product Images

Quarter Round (Profile #296)