Quarter Round for Laminate – Product and Installation – Updated Profile

This article is for an updated quarter round profile that supersedes a previous part. This article applies to quarter round with model numbers that end with an “R” suffix. To see the previous article for the quarter round with model numbers that do NOT end in”R”, follow this link.

Quarter Round is used to conceal the required expansion space between the wall and the laminate flooring.

Product Features

  • Used to cover the gap between the floor and the wall.
  • Surface material: Wear resistant laminate
  • Core material: Moisture resistant MDF

Materials and Tools:

  • Quarter round molding
  • Pencil
  • Tape measure
  • Saw
  • Finish nails
  • Hammer
  • Nail set
  • Wood glue
  • Color coordinated filler

Installation Procedures

Fasten the Quarter Round to the wall or baseboard. Do NOT fasten it to the floorcovering.

Step 1: Measure and trim to fit.

Step 2: Leaving a 1/4″ space between the flooring and the wall, cover the gap with quarter round molding.

Step 3: Secure with finishing nails.

Product Dimensions

Length: 94″ (238.76 cm)

Updated on October 26, 2022

Article Attachments