For Use With
- Loose Lay LVT
- Rigid Core
- HPDC®
- Hybrid Resilient Floors & Laminate
- Nail Down Solid Hardwood
- Floating Engineered Hardwood with Attached Pad
Recommended Spaces
- Multi-family housing
- Single-family housing
- Apartments
- Condominiums
- Light commercial spaces
Product Features
- A 6-mil polyethylene moisture barrier designed to help protect flooring installations from moisture vapor migrating through concrete slabs or wood subfloors
- Quick & Easy: Install with simple roll-out and seam overlap
- Versatility: Use over any subfloor
- Protection: Class I vapor barrier against concrete moisture
Product Information
| Gauge | 6 mil (.006″) (.015 mm) |
| Width | 46″ (116.9 cm) |
| Length | 26′ (7.9 m) |
| Color | Black |
| Installation | Loose lay; adhere seams with included overlapping lip & tape |
| Type | 6 mil Polyethylene Film |
| Coverage | 100 square feet per roll |
| Manufacturing Location | USA |
| Size | 100 square foot roll |
| Item Number | QC-SHIELD-ROL |
| Item UPC | 840489227792 |
| Rolled Dimensions | 2″ x 2″ x 46″ (5.1 cm x 5.1 cm x 116.8 cm) |
| Weight Per Piece | 2.9 lbs (1.3 kg) |
| Weight Per Carton | 34.8 lbs (15.8 kg) |
| Rolls Per Carton | 12 |
| Cartons Per Pallet | 36 |
Recommended Substrates
- Concrete on (all grade levels) according to ASTM F710 and Preparation of Concrete Subfloors
- Suspended Wood and Wood Underlayments
- Existing well-bonded resilient flooring; not perimeter-bonded or cushion-backed. single layer, fully adhered
- Radiant-heated subfloors where the surface temperature does not exceed 85oF (29o C)
Application Instructions
- Make sure subfloor is clean, flat, dry, and free of all debris.
- Begin in corner of room, and unroll Quiet Comfort Shield parallel to the wall.
- TIP: Secure the edges of the film with double sided tape to prevent shifting
as the flooring is being installed.
- TIP: Secure the edges of the film with double sided tape to prevent shifting
- Overlap seams at least 8”. The edge of the plastic with the adhesive liner should
be the top layer. - Remove the liner from the adhesive strip on the edge of the film and firmly press into place creating a moisture resistant seal.
- Any tears in the film should be sealed with underlayment tape to maintain
moisture barrier.
Product Image
