SDS
S-385 Satinkeeper Low Gloss Floor Finish SDS
Do not reuse container. Dispose of container and residue in accordance with federal, state and local waste disposal regulations. Do not flush Satinkeeper residue down drains.
Product Information
Traffic Type: Residential, Light Commercial
Use For: Armstrong Flooring Residential Vinyl Sheet and Vinyl Tile, Genuine Linoleum, Asphalt Tile, Rubber Tile, Ceramic – although not much value on glazed ceramic; unglazed – other products designed for this use will produce better results, Slate and Terrazzo – other products designed for this use will produce better results
Do Not Use For: Hardwood, Laminate, Cork or Marble Floors or High Gloss Vinyl Flooring
Spread Rate: 375 – 500 sq ft per quart
Available Units: Quart
VOC Content: <1%; California General Consumer Products Rule, California Code of Regulations
Shelf Life: Two years if not opened.
Storage: Keep from freezing.
Manufacturing Location: USA
| Language | English |
| Size | Quart |
| Item No. | 00385601 |
| Item UPC | 042369372589 |
| Dimensions | N/A |
| Weight | 14 lbs/ctn |
| Quantity per Carton | 6 |
Product Features
- Renews worn or dulled floors
- Protects floor from scuffs, scratches and dirt
- Does not require buffing
- Resists harsh detergents
- Metal cross-linked acrylic copolymer
- Resists scuffing and water-spotting
- pH of 8.6
- 18% solids
Application Instructions
FLOOR PREP:
- Sweep or vacuum thoroughly
- Wash with Armstrong Flooring Once ‘n Done Floor Cleaner (Do not use Once ‘n Done on linoleum)
APPLYING POLISH:
- Initially, apply two thin coats with a clean damp sponge mop or microfiber applicator mop and allow at least 30 minutes drying time between coats
- Make sure the entire surface is coated
- Dries in approximately 30 minutes – do not buff
- In high humidity areas, Satinkeeper may take longer than 30 minutes to dry
ONGOING POLISHING:
- Reapply Satinkeeper Floor Finish as needed – 1 or 2 coats at a time
- If necessary, remove Satinkeeper with Armstrong Flooring New Beginning Floor Stripper & Cleaner. Note: Armstrong Flooring New Beginning Floor Stripper & Cleaner can not be used on linoleum to remove the Satinkeeper. Use a linoleum-safe stripper instead.
NOTE:
- In high humidity areas, Satinkeeper may take longer than 30 minutes to dry