Armstrong Flooring S-480 Commercial Floor Polish DATA SHEET

SDS

S-480 Commercial Floor Polish SDS

Product Information

Traffic Type: Commercial
Use For:
    All Armstrong Flooring commercial vinyl floor coverings except Excelon SDT
    Asphalt and rubber tile
    Linoleum
    Ceramic – although not of much value on glazed ceramic
    Slate and terrazzo although other products are designed for better results
Do Not Use For: Wood and marble
Color: Milky, dries clear
Spread Rate: 1,500 to 2,000 square feet/gallon/coat depending on surface characteristics of the floor
Available Units: Gallon – 4 gal/ctn; 5 Gallon
VOC Content: 0%; as required by California General Consumer Products Rule, California Code of Regulations
Shelf Life: 
One year if not opened.
Storage: Keep from freezing.

LanguageEnglish/SpanishEnglish/French
Size1 gallon
5 gallon
1 gallon (3.78L)
5 gallon (18.9L)
Model No.1 gallon – 00480408
5 gallon – 00480508
1 gallon – S-480601
5 gallon – S-480603
UPC1 gallon – 042369059503 (ctn)
042369159500 (bottle)
5 gallon – 042369059534
1 gallon – 10042369159866 (ctn)
042369159869 (bottle)
5 gallon – NA
Carton Dimensions1 gallon – 16″L x 11″W x 14″H
5 gallons – 12.5″L x 12.5″W x 14.75″H
1 gallon – 16″L x 11″W x 14″H
5 gallons – 12.5″L x 12.5″W x 14.75″H
Carton Weight1 gallon – 37.1 lbs (16.3 kg)
5 gallon – 45.6 lbs (21.3 kg)
1 gallon – 37.1 lbs (16.3 kg)
5 gallon – 45.6 (21.3 kg)
Items per Carton1 gallon – 4
5 gallon – Containers sold individually
1 gallon – 4
5 gallon – Containers sold individually
Cartons per Pallet1 gallon – 40
5 gallon – 36
1 gallon – 40
5 gallon – 36

Product Features

  • High durability for long-lasting protection.
  • Metal cross-linked acrylic copolymer emulsion polish.
  • 18% solids for easy application and excellent leveling.
  • Dries bright for areas where buffing is not applicable or desired.
  • Excellent buffing response for spray-buffing repairs or high-speed burnishing programs (up to 2,000 rpm).
  • Readily strippable.
  • Meets the ASTM D2047 standard for slip resistance on dry floors.
  • pH of 8.5 – 8.75.

FloorScore

FloorScore Certificates – Polishes

Application Instructions

FLOOR PREP:

  1. Sweep or vacuum thoroughly
  2. Wash with S-485 Armstrong Floor Cleaner
  3. Rinse thoroughly
  4. Let floor dry

POLISH – LOW TRAFFIC:

  1. Apply 3 to 5 coats (do not apply more than four coats of polish at one time; wait a minimum of 24 hours before applying more polish)
  2. Pour polish into a clean bucket (never pour polish directly onto floor)
  3. Use a clean finish mop (rayon) or finish applicator
  4. Let dry 30 minutes between coats

POLISH – HIGH TRAFFIC:

  1. Follow instructions above for Low Traffic; then
  2. High speed burnish OR Spray buff (spray-buff solution one part S-480 to two parts water) OR Apply 1 or 2 extra coats
Updated on November 16, 2023