Crayon, Lipstick, Mercurochrome, Mustard, Driveway Sealer

1. Apply Armstrong New Beginning liberally to the stained area
2. Allow the New Beginning to soak on the area for 5 minutes
3. Scrub with a nonabrasive white pad to remove
4. Rinse thoroughly
5. Repeat if necessary

Grape Juice, Paint, Black Heel Marks

1. Dilute 3 oz. of Armstrong Once ‘n Done in a gallon of warm water
2. Scrub the area with the diluted Once ‘n Done and a nonabrasive white pad
3. If the stain still remains liberally apply Armstrong New Beginning to the area and allow to soak for 5 minutes
4. Scrub with a nonabrasive white pad to remove the stain
5. Rinse thoroughly
6. Repeat if necessary

Pen Ink, Permanent Marker, Nail Polish, Hair Dye

1. Dilute 3 oz. of Armstrong Once ‘n Done in a gallon of warm water
2. Scrub the area with the diluted Once ‘n Done and a nonabrasive white pad
3. If the stain still remains, liberally apply Armstrong New Beginning to the area and allow to soak for 5 minutes
4. Scrub with a nonabrasive white pad to remove the stain
5. Rinse thoroughly
6. If the stain still remains, rub the stain with rubbing alcohol (isopropyl alcohol)* on a clean, white cloth
7. Repeat if necessary

Shoe Polish

1. Rub the stain with mineral spirits* or turpentine* on a clean, white cloth.
2. If stain still shows, rub the stain with rubbing alcohol (isopropyl alcohol)* on a clean, white cloth.
3. Scrub the area with Armstrong New Beginning Floor Stripper and Cleaner** and a nonabrasive white scrubbing pad, following instructions on the label.

Paint/Varnish

1. If paint stain is wet, wipe up the stain with water on a clean, white cloth.
2. If paint stain is dry, carefully scrape residue with a thin spatula.
3. If stain still shows, rub the stain with rubbing alcohol (isopropyl alcohol)* on a clean, white cloth.
4. If stain still shows, use mineral spirits* or turpentine* on a clean, white cloth.
5. If stain still shows, very carefully wipe with fingernail polish remover* containing acetone on a clean, white cloth.
6. Scrub the area with Armstrong New Beginning Floor Stripper and Cleaner** and a nonabrasive white scrubbing pad, following instructions on the label.

Rust

1. Apply Armstrong New Beginning Floor Stripper and Cleaner** to the stain and let it stand for five minutes. Scrub vigorously with a stiff-bristle brush or nonabrasive white scrubbing pad, wipe, rinse, and let dry.
2. If traces remain, rub with a soft cloth dipped in a solution of oxalic acid and water (1 part acid to 10 parts water). NOTE: Please follow instructions and cautions on label, as oxalic acid is poisonous.

*May be combustible/flammable; please follow instructions on label.
**WARNING – Eye and Skin irritant