![](https://www.floorexpert.com/wp-content/uploads/2024/06/AHF-Family-of-Brands-Logo-6-24-1024x169.png)
Product Attributes
Transitions floor to edge of stair to provide a finished trim.
For use as a stair landings trim, elevated floor perimeters and stair steps.
Installation Procedures
Installation of Stairnose
- Install the Stairnose first.
- Attach Stairnose with nails (6d finish nails) and construction adhesive. When using construction adhesive, weight down the Stairnose evenly to ensure proper contact with the subfloor.*
- Always predrill Stairnose pieces with appropriate size drill bit to avoid cracking or splitting.
- Apply a bead of recommended wood glue to the groove of the first board and continue installation.
* When installing over radiant heated subfloors, use only constrution adhesive to attach Stairnose pieces to the subfloor.
Product Image
![](https://hardwoodexpert.ahfproducts.com/wp-content/uploads/2019/09/tm-stairnose-flush.jpg)
Stairnose 1/2″ Flush-Fit
Length: 78″
Current Version
![](https://hardwoodexpert.ahfproducts.com/wp-content/uploads/2019/07/kAD610000000011GAA_en_US_3_1.gif)
Length: 78″
Old Version (Discontinued)
![](https://hardwoodexpert.ahfproducts.com/wp-content/uploads/2019/07/kAD610000000011GAA_en_US_3_2-1024x468.gif)
1/2″ Flush-Fit Stairnose for Floating Installations (14MM)
Length: 78″
![](https://hardwoodexpert.ahfproducts.com/wp-content/uploads/2019/07/kAD610000000011GAA_en_US_3_3-1024x323.gif)