Product Attributes
Transitions floor to edge of stair to provide a finished trim.
For use as a stair landings trim, elevated floor perimeters and stair steps
Product Data Table
| PIECE PROPERTIES | |
| Item Length | 78″ (198.1 cm) |
| CARTON PROPERTIES | |
| Pieces Per Carton | 5 |
| Length Per Carton | 32.5 lin ft (9.91 lin m) |
| Carton Weight | 12.5 lbs (5.7 kg) |
| PALLET PROPERTIES | |
| Cartons Per Pallet | 20 |
| Length Per Pallet | 650 lin ft (198.2 lin m) |
Installation Procedures
Installation of Stairnose
- Install the Stairnose first.
- Attach Stairnose with nails (6d finish nails) and Bruce Glue Assist Pro Adhesive or construction adhesive. When using adhesive, weight down the Stairnose evenly to ensure proper contact with the subfloor.*
- Always predrill Stairnose pieces with appropriate size drill bit to avoid cracking or splitting.
- Apply a bead of recommended wood glue to the groove of the first board and continue installation.
* When installing over radiant heated subfloors, use only adhesive to attach Stairnose pieces to the subfloor.
Product Images
7/16″ Flush-Fit Stairnose
Length = 78″
