![](https://www.floorexpert.com/wp-content/uploads/2024/06/AHF-Family-of-Brands-Logo-6-24-1024x169.png)
Product Features
- Used to fill the gap between the floor and carpet, hearths or against sliding doors.
- Surface: Wear resistant
- Core Material: Rigid PVC
- Length: 94″ (238.76 cm)
Installation Procedures
- Install the flooring leaving a 1-1/4” gap between the two floor surfaces for the threshold installation.
- Measure and trim to fit.
- Center the track between the flooring leaving a 1/4” spacing between the track and floor planks. Screw track to subfloor using included screws (or glue down with construction adhesive).
- Starting at one end, press the molding into the track inching along the length of the molding. It will NOT snap in all at once. You may also use a rubber mallet.
5mm & 6mm Threshold
![](https://hardwoodexpert.ahfproducts.com/wp-content/uploads/2022/01/image-5.png)
![](https://hardwoodexpert.ahfproducts.com/wp-content/uploads/2022/01/image-8.png)