
Product Features
Covers the expansion space at a threshold or sliding door.
Used against sliding door tracks, fireplaces, carpet, ceramic tile or existing thresholds to allow for expansion space and to provide a smooth transition in height difference.
Installation Procedures
- DO NOT nail or drill into the molding. This will compromise the water resistant wear layer.
- For best results, use an MS polymer adhesive. Cut the tip of the cartridge to create a 1/4″ opening at 45 degrees.
- Applying the adhesive to the profile bottom allows for best control. Applying the adhesive directly to the subfloor is also acceptable.
- Firmly press the profile against the subfloor, occasionally lifting the piece to ensure proper transfer is made to the bonding surface.
- DO NOT nail or drill into the molding. This will compromise the water resistant wear layer.
- For best results, use an MS polymer adhesive. Cut the tip of the cartridge to create a 1/4″ opening at 45 degrees.
- Applying the adhesive to the profile bottom allows for best control. Applying the adhesive directly to the subfloor is also acceptable.
- Firmly press the profile against the subfloor, occasionally lifting the piece to ensure proper transfer is made to the bonding surface.
- Avoid traffic on the area until the adhesive has cured.
Product Structure

Product Images

Threshold Square Nose (Profile #291)

Length 96″
Threshold Square Nose (Profile #300)

Length 96″