Product Information
Traffic Type: Residential, Light Commercial, Commercial
Overall Thickness: 7/16″ (1.1 cm), 1/2″ (1.2 cm)
Varying Length Range: 10″ – 96″ (25.4 cm – 243.9 cm)
Board Width: 7.5″ (19.1 cm), 8.5″ (21.6 cm)
Ply: 7/16″ Items: 8, 1/2″ Items: 6
Face Veneer Cut/Thickness: See Table Below
Species: Walnut, Maple, Pine, Cherry, Ash
Finish: Nano Aluminum Oxide Urethane
Gloss: Low
Face Treatment: Wire Brushed
Edge/End Treatment: Micro Beveled Edges/Micro Beveled Ends
Manufacturing Location: USA
Warranty
Lifetime Residential Limited Warranty
10 Year Commercial Limited Warranty
Product Structure
Product Features
A Historical Legacy With Unmatched Durability
Our Timber Legends™️collection is an ode to the coveted, historic, and once thought lost Longleaf pine. By combining careful and sustainable logging practices, with our densified
wood technology, Timber Legends is a revolutionary breakthrough in hardwood flooring. It’s a collection that honors the past but is reimagined for the future.
Timber Legends pays homage to Longleaf pine, known for its dense, strong and rot/insect/ resistant wood. Nearly logged to extinction in the 1990s, only a small fraction of the original forests remain today. In collaboration with Menominee Tribal Enterprises, known for sustainable logging practices for 160 years, Timber Legends is made from a readily available and managed resource that will be available for future generations. It is enhanced to be the most scratch and dent resistant wood flooring available – and with a sustainability story that is equally as existing.
- The Densified Wood Difference
- Densified wood flooring is made with a groundbreaking, patent-pending process that creates “densified wood,” a pure 100% natural wood floor that’s resistant to scratches, gouges and dents – and pet’s nails.
- Densified hardwood includes a premium topcoat that promotes water resistance. Densified hardwood will resist topical water damage for up to 8 hours; this means topical water will not penetrate the wood flooring nor permanently stain the floor if it is properly cleaned-up and removed within 8 hours of first exposure to the liquid.
- Enjoy real hardwood floors virtually worry free. It’s more than a new product — it’s a whole new category of flooring.
Sustainability
FloorScore Certificates – Hardwood Products
SDS
Hardwood Flooring Products SDS
Installation
Installation Method Options:
Staple-Down*, Floating or Glue-Down
Note: Do not staple down smooth traditionally finished Pecan, Maple or Hickory Products
All species of textured products (such as hand-scraped, wire-brushed, and rustic/distressed products ) can be stapled down with 20 gauge staples (1” minimum length for 3/8” – ½” engineered hardwood, for 9/16” hardwood, use 1-1/4” fasteners).
FOR PRODUCTS WIDER THAN 5˝: In addition to the use of mechanical fasteners, assisted glue applications should be used. The glue should be a premium grade urethane construction adhesive applied in a serpentine pattern to the back of each board. Then follow the recommended fastening pattern.
Floating Underlayment:
Premium underlayment labeled for use with floating engineered hardwood floors
Floating Adhesive:
Bruce Everseal Floating Floor Tongue & Groove Adhesive
Glue Down Adhesive:
Bruce Proconnect Plus Vapor Barrier Elastomeric Flooring Adhesive
Bruce Equalizer Pro Moisture-Cured Urethane Adhesive
Bruce Summit Select Unlimited Moisture Vapor Barrier Elastomeric Wood Flooring Adhesive
Blend Cartons For Best Appearance
Hardwood is a natural product and does not have dye lots. Floor should be installed from several cartons at the same time to ensure good color and shade mixture.
Care and Maintenance
Maintenance Recommendations
Caring for Urethane Finish Hardwood Floors in a Residential Setting
Recommended Maintenance Products
Bruce Hardwood & Laminate Floor Cleaner
Bruce Hardwood & Laminate Terry Cloth Cleaning System
Bruce Hardwood & Laminate Microfiber Cleaning System
Product Data Table
| CARTON PROPERTIES | 7/16″ Items | 1/2″ Items |
| Length | 97.3″ (247.2 cm) | 97.3″ (247.2 cm) |
| Width | 7.9″ (20 cm) | 9″ (22.9 cm) |
| Height | 3″ (7.6 cm) | 3.3″ (8.3 cm) |
| Coverage Per Carton | 28 sq ft (2.60 sq m) | 32 sq ft (2.97 sq m) |
| Carton Weight | 44 lbs (20 kg) | 60 lbs (27.2 kg) |
| PALLET PROPERTIES | 7/16″ Items | 1/2″ Items |
| Cartons Per Pallet | 48 | 40 |
| Coverage Per Pallet | 1344 sq ft (124.8 sq m) | 1280 sq ft (118.8 sq m) |
*Indicates molding item is discontinued.
| Timber Legends Color | Species | Thickness x Width | Face Veneer Cut & Thickness Before/After Densification | Model Number | Quarter Round Length 78″ | T-Mold Length 78″ | Reducer Flush-Fit Length 78″ | Threshold Length 78″ | Stairnose Flush-Fit Length 78″ | Touch-Up Kit |
| Natural | Walnut | 1/2″ x 8.5″ (1.2 cm x 21.6 cm) | Sliced 4.5 mm/ 3 mm | HPEW801W | TQ0WA1081LW | TM0WA1081LW | TR5WA1081LW | TH0WA1081LW | TS5WA1081LW | N/A |
| White Maple | Maple | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 2.6 mm/ 2 mm | HPEM611W | TQ0MA1082LW | TM0MA1082LW | TR4MA1082LW | TH0MA1082LW | TS4MA1082LW | N/A |
| Southern Lake | Pine | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 5 mm/ 2 mm | HPEP621W (Disc 1/25) | TQ0AS1083LW* | TM0AS1083LW* | TR4AS1083LW* | TH0AS1083LW* | TS4AS1083LW* | N/A |
| Long Leaf | Pine | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 5 mm/ 2 mm | HPEP631W (Disc 1/25) | TQ0AS1084LW* | TM0AS1084LW* | TR4AS1084LW* | TH0AS1084LW* | TS4AS1084LW* | N/A |
| Cone Brown | Pine | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 5 mm/ 2 mm | HPEP641W (Disc 1/25) | TQ0AS1085LW* | TM0AS1085LW* | TR4AS1085LW* | TH0AS1085LW* | TS4AS1085LW* | N/A |
| Native Pine | Pine | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 5 mm/ 2 mm | HPEP651W (Disc 1/25) | TQ0AS1086LW | TM0AS1086LW | TR4AS1086LW* | TH0AS1086LW | TS4AS1086LW* | N/A |
| Natural | Cherry | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 3.5 mm/ 2 mm | HPEC661W | TQ0CH1087LW | TM0CH1087LW | TR4CH1087LW | TH0CH1087LW | TS4CH1087LW | N/A |
| Shenandoah | Ash | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 3.2 mm/ 2 mm | HPEA671W | TQ0AS1088LW | TM0AS1088LW | TR4AS1088LW | TH0AS1088LW | TS4AS1088LW | N/A |
| Light Maple | Maple | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 3.5 mm/ 2 mm | HPEM681W | TQ0MA1089LW | TM0MA1089LW | TR4MA1089LW | TH0MA1089LW | TS4MA1089LW | N/A |
| Natural | Ash | 7/16″ x 7.5″ (1.1 cm x 19.1 cm) | Sawn 3.2 mm/ 2 mm | HPEA691W | TQ0AS1090LW | TM0AS1090LW | TR4AS1090LW | TH0AS1090LW | TS4AS1090LW | N/A |
| Timber Legends Color | Species | Thickness x Width | Face Veneer Cut & Thickness Before/After Densification | Model Number | Quarter Round Length 78″ | T-Mold Length 78″ | Reducer Flush-Fit Length 78″ | Threshold Length 78″ | Stairnose Flush-Fit Length 78″ | Touch-Up Kit |