Product Information
Traffic Type: Residential, Light Commercial, Commercial
Overall Thickness: 1/2″ (1.2 cm)
Varying Length Range: 10″ – 96″ (25.4 cm – 243.8 cm)
Board Width: 7.5″ (19.1 cm)
Ply: 7
Face Veneer Cut/Thickness: Sawn 4.9 mm (before densification), 2.0 mm (after densification)
Species: Pine
Finish: Urethane with Aluminum Oxide
Gloss: Low
Face Treatment: Traditional Smooth
Edge/End Treatment: Micro Beveled Edges/Micro Beveled Ends
Manufacturing Location: USA
Warranty
50 Year Residential Limited Warranty
10 Year Commercial Limited Warranty
Product Structure
Product Features
Real Hardwood and Softwood Species Densified for Commercial Applications
Our revolutionary process uses heat and pressure to close the open cells in hardwood, creating an ultra-dense engineered hardwood floor that’s ideal for commercial spaces. So, softwood and hardwood species that were not suited for commercial applications are now viable design options! Our patented, proprietary process is 100% natural, no acrylic fillers, which means your hardwood is 100% natural. Plus, compression is at the veneer, not the core, placing protection at the surface of every plank, where you need it most.
- The Densified Wood Difference
- Densified wood flooring is made with a groundbreaking, patent-pending process that creates “densified wood,” a pure 100% natural wood floor that’s resistant to scratches, gouges and dents – and pet’s nails.
- Densified hardwood includes Hydropel Waterproof Technology promotes water resistance. Densified hardwood will resist topical water damage for up to 8 hours; this means topical water will not penetrate the wood flooring nor permanently stain the floor if it is properly cleaned-up and removed within 8 hours of first exposure to the liquid.
- Enjoy real hardwood floors virtually worry free. It’s more than a new product — it’s a whole new category of flooring.
Testing
Resistance to Staining – Commercial Hardwood Flooring
Light Reflectivity Values – Commercial Hardwood Flooring
| Performance | Test Method | Requirement | Performance vs. Requirement |
| Fire Test Data – Flame Spread | ASTM E648 | 0.45 W/cm2 or more Class 1 | Meets |
| Fire Test Data – Smoke Evolution | ASTM E662 | 450 or less | Meets |
| Fire Test Data – Canada | CAN/ULC S-102.2 | Use dependent | N/A |
| Fire Test Data – Walls | ASTM E84 | 450 or less – Class C | Meets |
| Stain Resistance | ASTM F925 | — | Meets |
| Micro Scratch Resistance (A & B) | EN 1604 | Part A – Gloss Part B – Scratch | Exceeds – A1 & B1 |
| Taber Abrasion Resistance | EN 13329 | — | Exceeds – (TimberTones results = 1,607 cycles) |
| Coating | ASTM G21 | — | Compliant |
| Janka Hardness | ASTM D1037 | Results for each species available from your AHF Products rep | Exceeds standard Janka test |
| Falling Ball Indentation Test (60 inches) | ASTM D2394 | — | Exceeds – .002 inch |
| Static Coefficient of Friction | ASTM D2047 | ≥ 0.5 | Meets |
Recommended Applications
Recommended Applications Chart – Commercial Hardwood
Guide Specification
Guide Specifications – Commercial Hardwood Flooring
Sustainability
FloorScore Certificates – Hardwood Products
| WELL v2 Feature | TimberTones | Contribution | |
| Materials | Feature X06.1 VOC Restrictions |  | Limit VOCs from Wet-Applied Products Adhesive is SCAQMD Rule 1168 Compliant FloorScore Certification |
| Materials | Feature X06.2 VOC Restrictions | | Restrict VOC Emissions from Furniture, Architectural and Interior Products FloorScore Certification (SCS-FS-05600) |
| Mind | Feature M02 Nature and Place | | Provide Connection to Nature |
| LEED™ v4.1 | TimberTones |
| Location of Manufacturer | Somerset, Kentucky |
| Low Emitting Flooring | Tested and third party certified by FloorScore as complying with CDPH v1.2 FloorScore Certification (SCS-FS-05600) |
| Low Emitting Adhesives – Testing and third-party certified by FloorScore® – SCAQMD #1168 Compliant | Bruce® ProConnect™ Plus, Bruce Equalizer Pro™, Bruce Summit Select™ Adhesives meet <50 g/L requirement |
SDS
Hardwood Flooring Products SDS
Installation
Installation Method Options:
Staple-Down*, Floating or Glue-Down
*Note: Do not staple down smooth traditionally finished Pecan, Maple or Hickory Products
All species of textured products (such as hand-scraped, wire-brushed, and distressed products) can be stapled down with 20 gauge staples (1” minimum length for 3/8” – 1/2″ engineered hardwood, for 9/16” hardwood, use 1-1/4” fasteners).
Special Note for Mechanically Fastened Installations:
GLUE ASSIST FOR PRODUCTS WIDER THAN 5˝: In addition to the use of mechanical fasteners, the glue assist method should be used. The glue should be Bruce Glue Assist Pro or a premium grade urethane construction adhesive applied in a serpentine pattern to the back of each board. Then follow the recommended fastening pattern.
Adhesive For Glue Down Installations:
Bruce Proconnect Plus Vapor Barrier Elastomeric Flooring Adhesive
Bruce Equalizer Pro Moisture-Cured Urethane Adhesive
Bruce Summit Select Unlimited Moisture Vapor Barrier Elastomeric Wood Flooring Adhesive
Acoustic Underlayment For Floating Installations:
Bruce Quiet Comfort SoundMax Underlayment
Bruce Quiet Comfort MultiGuard Underlayment
Joint Adhesive For Floating Installations:
Bruce Everseal Floating Floor Tongue & Groove Adhesive
Blend Cartons For Best Appearance
Hardwood is a natural product and does not have dye lots. The floor should be installed from several cartons at the same time to ensure good color and shade mixture.
Care and Maintenance
Maintenance Recommendations
Caring for Commercial Densified Engineered Hardwood Floors
Caring for Urethane Finish Hardwood Floors in a Residential Setting
Recommended Maintenance Products
Bruce Hardwood & Laminate Floor Cleaner
Bruce Hardwood & Laminate Terry Cloth Cleaning System
Bruce Hardwood & Laminate Microfiber Cleaning System
Product Data Table
| CARTON PROPERTIES | |
| Length | 97.3″ (247.2 cm) |
| Width | 7.9″ (20 cm) |
| Height | 3″ (7.6 cm) |
| Coverage Per Carton | 24 sq ft (2.23 sq m) |
| Carton Weight | 46 lbs (20.9 kg) |
| PALLET PROPERTIES | |
| Cartons Per Pallet | 48 |
| Coverage Per Pallet | 1152 sq ft (107.04 sq m) |
Items with T ending code should not be installed with earlier versions. There is a difference in fit.
| TimberTones Color | Model Number | Model Number  | Quarter Round Length 78″ | T-Mold Length 78″ | Reducer Flush-Fit Length 78“ | Threshold Length 78″ | Stairnose Flush-Fit Length 78″ | Touch-Up Kit |
| Coral Canopy | LM19P-526S (Disc 6/26) | LM19P-526ST | TQ0AS1083LS | TM0AS1083LS | TR5AS1083LS | TH0AS1083LS | TS5AS1083LS | N/A |
| Carnelian Crest | LM19P-536S | LM19P-536ST | TQ0AS1084LS | TM0AS1084LS | TR5AS1084LS | TH0AS1084LS | TS5AS1084LS | N/A |
| Seed Brown | LM19P-546S | LM19P-546ST | TQ0AS1085LS | TM0AS1085LS | TR5AS1085LS | TH0AS1085LS | TS5AS1085LS | N/A |
| Sunny Natural | LM19P-556S (Disc 3/26) | LM19P-556ST | TQ0AS1086LS | TM0AS1086LS | TR5AS1086LS | TH0AS1086LS | TS5AS1086LS | N/A |
| TimberTones Color | Model Number | Model Number | Quarter Round Length 78″ | T-Mold Length 78″ | Reducer Flush-Fit Length 78“ | Threshold Length 78″ | Stairnose Flush-Fit Length 78″ | Touch-Up Kit |
| Color | Stair Tread No Return Length 42” | Stair Tread No Return Length 48” | Stair Tread No Return Length 60” | Stair Tread Double Return Length 42” | Stair Tread Double Return Length 48” | Stair Tread Double Return Length 60” |
| Coral Canopy | TDN42AS1083L | TDN48AS1083L | TDN60AS1083L | TDD42AS1083L | TDD48AS1083L | TDD60AS1083L |
| Carnelian Crest | TDN42AS1084L | TDN48AS1084L | TDN60AS1084L | TDD42AS1084L | TDD48AS1084L | TDD60AS1084L |
| Seed Brown | TDN42AS1085L | TDN48AS1085L | TDN60AS1085L | TDD42AS1085L | TDD48AS1085L | TDD60AS1085L |
| Sunny Natural | TDN42AS1086L | TDN48AS1086L | TDN60AS1086L | TDD42AS1086L | TDD48AS1086L | TDD60AS1086L |
| Color | Stair Tread No Return Length 42” | Stair Tread No Return Length 48” | Stair Tread No Return Length 60” | Stair Tread Double Return Length 42” | Stair Tread Double Return Length 48” | Stair Tread Double Return Length 60” |
| Color | Stair Tread Right Return Length 42″ | Stair Tread Right Return Length 48″ | Stair Tread Right Return Length 60″ | Stair Tread Left Return Length 42″ | Stair Tread Left Return Length 48″ | Stair Tread Left Return Length 60″ | Riser Length 42” | Riser Length 48” | Riser Length 60” |
| Coral Canopy | TDR42AS1083L | TDR48AS1083L | TDR60AS1083L | TDL42AS1083L | TDL48AS1083L | TDL60AS1083L | TE42AS1083L | TE48AS1083L | TE60AS1083L |
| Carnelian Crest | TDR42AS1084L | TDR48AS1084L | TDR60AS1084L | TDL42AS1084L | TDL48AS1084L | TDL60AS1084L | TE42AS1084L | TE48AS1084L | TE60AS1084L |
| Seed Brown | TDR42AS1085L | TDR48AS1085L | TDR60AS1085L | TDL42AS1085L | TDL48AS1085L | TDL60AS1085L | TE42AS1085L | TE48AS1085L | TE60AS1085L |
| Sunny Natural | TDR42AS1086L | TDR48AS1086L | TDR60AS1086L | TDL42AS1086L | TDL48AS1086L | TDL60AS1086L | TE42AS1086L | TE48AS1086L | TE60AS1086L |
| Color | Stair Tread Right Return Length 42″ | Stair Tread Right Return Length 48″ | Stair Tread Right Return Length 60″ | Stair Tread Left Return Length 42″ | Stair Tread Left Return Length 48″ | Stair Tread Left Return Length 60″ | Riser Length 42” | Riser Length 48” | Riser Length 60” |