Product Information
Traffic Type: Residential, Light Commercial, Commercial
Overall Thickness: 3/8″ (1 cm)
Varying Length Range: 8″- 46″ (20.3 cm – 116.8 cm) (items ending in Z5P)
Varying Length Range: 8″- 60″ (20.3 cm – 152.4 cm) (items ending in EE)
Varying Length Range: 11.8″ – 48″ (30 cm – 122 cm) (items ending in F)
Board Width: 3″ (7.6 cm)
Ply: 5 (items ending in Z5P)
Ply: 3 (Densitek Core items, ending in EE)
Ply: 7 (items ending in F)
Face Veneer Cut/Thickness: Rotary 2.0 mm (items ending in Z5P and EE)
Face Veneer Cut/Thickness: Rotary 1.2 mm (items ending in F)
Species: Red Oak
Finish: Nano Aluminum Oxide Urethane
Gloss: High, Low (Indicated with LG in model number)
Face Treatment: Traditional Smooth
Edge/End Treatment: Square Edges/Square Ends (items ending in Z5P and EE)
Edge/End Treatment: Micro Edges/Micro Ends (items ending in F)
Manufacturing Location: USA (items ending in Z5P and EE)
Manufacturing Location: Cambodia (items ending in F)
Warranty
25 Year Residential Limited Warranty
10 Year Commercial Limited Warranty
Product Structure
Product Features
A Simple Classic
Beaumont hardwood floors feature the most popular species, Oak, in a classic 3˝ width. The micro edges and ends of the boards provide a clean, refined look with subtle plank definition and maintains visual consistency year-around. A high gloss piano finish presents high-end beauty.
- Hydropel Waterproof Technology resists topical water damage for up to 8 hours
Sustainability
FloorScore Certificates – Hardwood Products
SDS
Hardwood Flooring Products SDS
Installation
Installation Method Options:
Staple-Down*, Floating or Glue-Down
*Note: Do not staple down smooth traditionally finished Pecan, Maple or Hickory Products
All species of textured products (such as hand-scraped, wire-brushed, and distressed products) can be stapled down with 20 gauge staples (1” minimum length for 3/8” – 1/2″ engineered hardwood, for 9/16” hardwood, use 1-1/4” fasteners).
Special Note for Mechanically Fastened Installations:
GLUE ASSIST FOR PRODUCTS WIDER THAN 5˝: In addition to the use of mechanical fasteners, the glue assist method should be used. The glue should be Bruce Glue Assist Pro or a premium grade urethane construction adhesive applied in a serpentine pattern to the back of each board. Then follow the recommended fastening pattern.
Adhesive For Glue Down Installations:
Bruce Proconnect Plus Vapor Barrier Elastomeric Flooring Adhesive
Bruce Equalizer Pro Moisture-Cured Urethane Adhesive
Bruce Summit Select Unlimited Moisture Vapor Barrier Elastomeric Wood Flooring Adhesive
Acoustic Underlayment For Floating Installations:
Bruce Quiet Comfort SoundMax Underlayment
Bruce Quiet Comfort MultiGuard Underlayment
Joint Adhesive For Floating Installations:
Bruce Everseal Floating Floor Tongue & Groove Adhesive
Blend Cartons For Best Appearance
Hardwood is a natural product and does not have dye lots. The floor should be installed from several cartons at the same time to ensure good color and shade mixture.
Care and Maintenance
Maintenance Recommendations
Caring for Urethane Finish Hardwood Floors in a Residential Setting
Recommended Maintenance Products
Bruce Hardwood & Laminate Floor Cleaner
Bruce Hardwood & Laminate Terry Cloth Cleaning System
Bruce Hardwood & Laminate Microfiber Cleaning System
Product Data Table
| CARTON PROPERTIES | Plywood Core Items – Ending in Z5P | Densitek Core Items – Ending in EE | Plywood Core Items – Ending in F |
| Length | 47.5″ (120.7 cm) | 61″ (154.9 cm) | 48.8″ (124 cm) |
| Width | 13″ (33 cm) | 6″ (15.2 cm) | 9.8″ (25 cm) |
| Height | 3.8″ (9.5 cm) | 5″ (12.7 cm) | 3.2″ (8.2 cm) |
| Coverage Per Carton | 31 sq ft (2.88 sq m) | 31.50 sq ft (2.93 sq m) | 24.12 sq ft (2.24 sq m) |
| Carton Weight | 49.6 lbs (22.5 kg) | 53 lbs (24 kg) | 32 lbs (14.5 kg) |
| PALLET PROPERTIES | Plywood Core Items – Ending in Z5P | Densitek Core Items – Ending in EE | Plywood Core Items – Ending in F |
| Cartons Per Pallet | 30 | 30 | 40 |
| Coverage Per Pallet | 930 sq ft (86.40 sq m) | 945 sq ft (87.79 sq m) | 964.8 sq ft (89.6 sq m) |
Items ending in Z5P or EE should not be installed with old 3 ply version. There is a difference in ply structure.
Items with EE ending code are manufactured with Densitek core instead of a plywood core. The fit and appearance are unchanged. The Densitek and Z5P code plywood core products can be mixed in the same installation.
Items with F ending code should not be installed with earlier versions. There is a difference in fit.
| Color | Model Number | Densitek Core Model Number | Beaumont Plank Model Number  | Quarter Round Length 78″ | T-Mold Length 78″ | Reducer Flush-Fit Length 78″ | Threshold Length 78″ | Stairnose Flush-Fit Length 78″ | Touch-Up Kit |
| Warm Spice | 422210Z5P (Disc. 8/19) | 422210EE (Disc 7/26) | 422210F | 761920 | 781020 | 711620 | 771920 | 751620 | S-1154A |
| Standard | 422230Z5P (Disc. 8/19) | 422230EE (Disc 4/26) | 422230F | T740 | TMSRONA6045 | T820R | THSRONA6055 | T830-78 | S-1151A |
| Caramel | 422250Z5P Disc. 8/19) | 422250EE (Disc 2/26) | 422250F | 761925 | 781025 | 711625 | 771925 | 751625 | S-1151A |
| Saddle | 422260Z5P (Disc. 8/19) | 422260EE (Disc 7/26) | 422260F | 761935 | 781035 | 711635 | 771935 | 751635 | S-1151A |
| Sienna | 422270Z5P Disc. 8/19) | 422270EE (Disc 7/26) | 422270F | 761987 | 781087 | 711628 | 771987 | 751628 | S-1153A |
| Clear | 42223LGZ5P (Disc. 8/19) | 42223LGEE (Disc 12/25) | N/A | T740 | TMSRONA6045 | T820R | THSRONA6055 | T830-78 | S-1152A |
| Sandbar | 42225LGZ5P (Disc. 8/19) | 42225LGEE (Disc 12/25) | N/A | 761925 | 781025 | 711625 | 771925 | 751625 | S-1153A |
| Color | Model Number | Densitek Core Model Number | Beaumont Plank Model Number | Quarter Round Length 78″ | T-Mold Length 78″ | Reducer Flush-Fit Length 78″ | Threshold Length 78″ | Stairnose Flush-Fit Length 78″ | Touch-Up Kit |