Hardwood Flooring Board Replacement Procedures
Troubleshooting & Repairs REPLACEMENT OF PARQUET FILLET Drill a number of holes in fillet with a 5/8″ or smaller drill...
- Home
- Installation
- Glue Down
Glue Down
-
-
Adhesive Balling Up While Troweling
Troubleshooting & Repairs When the adhesive is incapable of being troweled satisfactorily; the adhesive “balls up” under the trowel. Balling... -
Adhesive Too Thick In Can
Troubleshooting & Repairs In most cases, this means the adhesive is no longer usable. This can occur when the shelf... -
Stringy Adhesive
Troubleshooting & Repairs Long strings of adhesive, normally while still in the container, usually a result of instability. These are... -
Dirt or Adhesive Spots on Flooring Surface
Troubleshooting & Repairs Sometimes reported that dirt collects on the surface and cannot be removed or sticky spots that cannot... -
Board Replacement for Engineered Glue-down Hardwood Floors
Troubleshooting & Repairs See Attachment Below Attached below is a file showing the board replacement technique for engineered glue-down hardwood... -
Board Replacement for Glue Down Lock & Fold Wood Floors
Troubleshooting & Repairs See Attachment Below Attached below is a file showing the Board Replacement for Lock & Fold glue... -
Expansion Space Recommendations For Hardwood Installations
Hardwood Expansion Space Recommendations Product Type Installation Method Expansion Space at all Vertical Surfaces 3/4″ Solid Nail down 3/4″ 5/16″... -
Hardwood Trowels Defined
Notch: the “cut-out” or gaps of a trowel through which the adhesive “flows”; determines the size and shape of the... -
LOCKING HARDWOOD WITH LOCK&FOLD™ TECHNOLOGY INSTALLATION INSTRUCTIONS
See attachments at bottom for French and Spanish language versions. FOR STAPLE DOWN, MECHANICALLY FASTENED, FLOATING AND GLUE DOWN APPLICATIONS...