

Product Information
Traffic Type: Residential; Builder Market
Gauge: .065″ (1.6 mm)
Roll Width: 12′ (3.7 m)
Roll Length: 56.25′ – 150′ (18.33 yd – 50 yd)
Wear Layer: .010″ (0.25 mm)
Coverage Per Roll: 90 – 200 sq yd (75 – 167 sq m) (675 – 1800 sq ft)
Shipping Weight: 2.3 lbs per sq yd (1 kg per sq yd)
Finish: Urethane No Wax with Diamond 10 Technology
Gloss: Ultra Low
Manufacturing Location: USA
Warranty
10 Year Residential Limited Warranty
Product Structure

Product Features
- See the FlexStep Pro collection at ArmstrongFlooring.com
- Our Toughest, Most Durable Surface: Diamond 10® Technology makes our sheet scratch, scuff and stain resistant to keep floors looking newer, longer.
- 100% Waterproof: Perfect for high moisture areas such as kitchens, bathrooms and laundry rooms.
- Made in the USA: Armstrong Flooring™ Vinyl Flooring is manufactured with global and domestic content
- Responsibly Made: All Armstrong Flooring™ Vinyl Sheet flooring products meet or exceed low emission standards for better indoor air quality as certified by FloorScore
REFERENCE SPECIFICATIONS: ASTM F 1303, Type I, Grade 3, Class C Backing
Complies with the requirements for floor coverings set forth in the HUD Minimum Property Standards for Housing (MPS 4910.1) for light traffic areas as referenced by ASTM F 1303, Type 1, Grade 3, Class C Backing. Note to user: This language supersedes our previous designations of “meets HUD/FHA requirements”.
FIRE TEST DATA:
ASTM E 648 Critical Radiant Flux– 0.45 watts/sq. cm. or more – Class I
ASTM E 662 Smoke – 450 or less
Numerical flammability ratings alone may not define the performance of the product under actual fire conditions. These ratings are provided only for use in the selection of products to meet the specified limits.
Sustainability
SDS
Resilient Sheet Flooring Products and Resilient Tile Flooring Products MIS
Installation
Location: | All grade levels |
System: | Fiberglass-Reinforced Sheet Flooring Installation System |
Pattern Match: | Yes; See table below |
Reverse Pieces: | Do not reverse pieces (Install TM edge to non-TM edge) |
Seams: | Double-cut seams; apply S-761 Seam Adhesive or S-500 Seam Coating Kit (Discontinued) |
Fitting: | All methods |
Adhesives: | Acrylic double-faced tape for modified loose lay method; Full Spread Installation Method Armstrong S-299 Flooring adhesive Armstrong S-295 Flooring Adhesive |
Installation Special Precautions and Recommendations:
- Refer to the Fiberglass-Reinforced Sheet Flooring Installation System for complete installation recommendations.
- Always check roll label for pattern match.
- The modified loose lay method requires that the flooring be cut 1/4″ 6.4 mm away from walls, cabinets, etc.
Care and Maintenance
Maintenance Guidelines:
All Residential and Light Commercial Vinyl Floors
Maintenance Products:
Cleaner: Once ‘n Done
Matte Polish: Satinkeeper
High Gloss Polish: Shinekeeper
Deep Cleaner & Stripper: New Beginning
Product Data Table
FlexStep Pro Pattern | Color | Pattern Number | Suffix | Pattern Match / Drop (L x W / Drop) | Economy Match | Design Scale |
Oak Creek | Chestnut Brown | G2901 | 401 | 48″ x 72″ | 6″ Random | 3-1/4 to 4-1/4″ oak planks |
Chickasaw Oak | Cocoa Brown | G2902 | 401 | 54″ x 72″ | 6″ Random | Varied width weathered oak plank |
Chickasaw Oak | Autumn Glory | G2903 | 401 | 54″ x 72″ | 6″ Random | Varied width weathered oak plank |
Hardland Oak | Driftwalk | G2904 | 401 | 54″ x 72″ / Half | 6″ Random | 6″ wide traditional oak plank |
Ridge Plank | Smoke | G2905 | 401 | 54″ x 72″ Half | 6″ Random | Variable width planks |
Ridgefield | Coral Sand | G2906 | 401 | 24″ x 24″ | N/A | 12″ Slate tiles |
Bedrock Ridge | Brown Sugar | G2907 | 401 | 48″ x 36″ / Half | 12″ | 12″ x 9″ Rectangular pavers |
Hardland Oak | Emeline Grey | G2908 | 401 | 54″ x 72″ / Half | 6″ Random | 6″ Wide traditional oak plank |
Titan Timbers | Silver Dapple | G2909 | 401 | 54″ x 72″ / Half | 12″ Random | 5 1/8″ Wide Traditional Oak Plank |
Vessa Travertine | Carbide Charm | G2910 | 401 | 54″ x 72″ / 6″ Progressive Drop | 18″ | 18″ x 9″ Travertine paver |
Vessa Travertine | Spent Grindstone | G2911 | 401 | 54″ x 72″ / 6″ Progressive Drop | 18″ | 18″ x 9″ Travertine paver |
Slatesdale | Beige | G2912 | 401 | 27″ x 36″ | 9″ | 9″ Ceramic paver with rich textured slate |
Stonegate | Winchester Brown | G2913 | 401 | 54″ x 36″ / Half | 18″ | 9″ Slate paver |
Englewood | Gunstock | G2914 | 401 | 54″ x 36″ / Half | 4″ Random | Oak wood strip |
Carriage Path | Oyster White | G2915 | 401 | 48″ x 48″ | 12″ | 12″ Modern limestone |
FlexStep Pro Pattern | Color | Pattern Number | Suffix | Pattern Match / Drop (L x W / Drop) | Economy Match | Design Scale |
Covington Oak | Gunstock | G2916 | 401 | 54″ x 72″ / Half | 6″ | 5″ Wide traditional oak plank |
Covington Oak | Dovetail | G2917 | 401 | 54″ x 72″ / Half | 6″ | 5″ Wide traditional oak plank |
Saratoga Stone | Café Crème | G2918 | 401 | 48″ x 72″ | 12″ | 12″ |
Saratoga Stone | Antique Bronze | G2919 | 401 | 48″ x 72″ | 12″ | 12″ Natural stone |
Brushedside Oak | Silver Crown | G2920 | 401 | 54″ x 72″ / Half | 6″ Random | 4″, 5″, 6″ Wire brushed oak |
Selur Travertine | Icing Baron | G2921 | 401 | 54″ x 48″ / Half | 6″ | 6″ Travertine |
Evendale Slate | Snow Gold | G2922 | 401 | 54″ x 72″ Half | 18″ | 9″ Slate planks |
Skye Gate Slate | White Flaxen | G2923 | 401 | 54″ x 72″ / Half | 6″ Random | 6″ Slate planks |
Skye Gate Slate | Old Muscat | G2924 | 401 | 54″ x 72″ / Half | 6″ Random | 6″ Slate planks |
Hardland Oak | Alex Grey | G2925 | 401 | 54″ x 72″ / Half | 6″ Random | 6″ Wide traditional oak plank |
Venetian Marble | Alabaster | G2926 | 401 | 54″ x 36″ | N/A | 4.5″ Hex |
Ridge Plank | Iron | G2927 | 401 | 54″ x 72″ / Half | 6″ Random | Variable width planks |
Timber Frame | Down Home Brown | G2928 | 401 | 54″ x 72″ / Half | 6″ Random | 7″ Plank |
Hilborn Run | Stone Grey | G2929 | 401 | 54″ x 72″ / Half | 27″ Marks | 5″ x 27″ |
Stone Hollow | Slate Run | G2930 | 401 | 54″ x 72″ / Half | 27″ Marks | Overall |
Ceruse Oak | Wolf Run | G2931 | 401 | 54″ x 72″ / Half | 6″ Random | Variable |
Deep Creek Timbers | Hearth | G2932 | 401 | 54″ x 72″ / Half | 4″ Random | 5″ |
FlexStep Pro Pattern | Color | Pattern Number | Suffix | Pattern Match / Drop (L x W / Drop) | Economy Match | Design Scale |