Adhesive Balling Up While Troweling Troubleshooting & Repairs When the adhesive is incapable of being troweled satisfactorily; the adhesive “balls up” under the trowel. Balling...
Adhesive Too Thick In Can Troubleshooting & Repairs In most cases, this means the adhesive is no longer usable. This can occur when the shelf...
Stringy Adhesive Troubleshooting & Repairs Long strings of adhesive, normally while still in the container, usually a result of instability. These are...
10 Causes of Floor Squeaks Troubleshooting & Repairs There is nothing that will destroy a customer’s confidence in the flooring installation faster than an annoying...
Dirt or Adhesive Spots on Flooring Surface Troubleshooting & Repairs Sometimes reported that dirt collects on the surface and cannot be removed or sticky spots that cannot...
Removal of Mold and Mildew Troubleshooting & Repairs Mold and mildew growth on a substrate should be removed before the installation of floorcovering. A qualified...
Rigid Core, Hybrid Resilient, LVT, VBT, and VCT Flooring Limited Warranty To access the current warranty for the products listed below, please see attachments below or click on the following links:...
AHF Contract Commercial Luxury Flooring Installation Instructions For Use With Nod to Nature USA 2.5 mm Dry Back & 4.5 mm Loose Lay LVT Nod to Nature...
MAINTENANCE RECOMMENDATIONS FOR COMMERCIAL LVT (DRY-BACK, RIGID CORE, LOOSE LAY) & VBT FOR BEST RESULTS: For glue down installations, do not allow any traffic on the floor for 24 hours after installation....
ASTM F925 Standard Test Method for Resistance to Chemicals of Resilient Flooring – Resistance to Staining & Reagents for Commercial Sheet, LVT, and VBT See attachments below for ASTM F925 Standard Test Method for Resistance to Chemicals of Resilient Flooring results for Commercial Sheet,...