Crossville Access Point 2.5mm & 2.0mm Commercial and Residential Luxury Vinyl Tile DATA SHEET

Product Information

Traffic Type: Residential, Light Commercial, Commercial
Overall Thickness: 2.5 mm (0.100″), 2.0 mm (0.080″)
Wear Layer: 20 mil, 12 mil
Finish: Urethane Plus
Gloss: Low
Face Treatment: Embossed
Edge/End Treatment: Micro Beveled Edges/Micro Beveled Ends
Manufacturing Location: USA

Width x Length: 

6″ x 48″ (15.3 cm x 121.9 cm)
18″ x 18″ (45.7 cm x 45.7 cm)


20 mil/2.5 mm Items: 15 Year Commercial Limited Warranty30 Year Residential Limited Warranty
12 mil/2.0 mm Items : 7 Year Commercial Limited Warranty, 15 Year Residential Limited Warranty

Product Structure

  1. Urethane Plus Coating
  2. Rigid Wear Layer
  3. Print Film
  4. Foundation Layer

Product Features

  • See the Access Point LVT collection at
  • Manufactured in the USA*, Access Point LVT offers a balance of performance, design and price – and is just a truck delivery away.
  • Its performance has been strengthened with Urethane Plus coating to provide enhanced resistance to scratches, stains and scuffs compared to standard urethane coatings.
  • The curated collection features sophisticated fabric designs in subtle neutral tones on a tile format, and an array of wood species, and even a stone-inspired wood plank to balance the collection.
  • 20 mil/2.5 mm items are ideally suited for areas where commercial flooring performance is a requirement. 12 mil/2.0 mm items can be used in light commercial spaces, Main Street businesses, and residential areas in mixed use properties.
  • Low VOC emissions – California Section 01350 compliant, third-party FloorScore certification and LEED eligibility

*Manufactured in the US with imported raw materials

MATERIAL: A tough, clear, unfilled polyurethane wear layer composed of polyvinyl chloride resins, plasticizers, stabilizers and processing aids on a filled vinyl backing.

PATTERN AND COLORS: The overall visuals are created by a print between the wear layer and intermediate color layer. The clear wear layer is embossed with different textures to enhance each of the printed visuals. Color pigments are insoluble in water and resistant to cleaning agents and light.

REFERENCE SPECIFICATION: ASTM F 1700, Class III, Type B – Embossed Surface


Per ASTM F 1700
PerformanceTest MethodRequirementPerformance vs. Requirement
ThicknessASTM F386Nominal ±0.005 in.Meets
Wear Layer ThicknessASTM F4100.020 in. (0.5 mm) minimum for Commercial Use20 mil/2.5 mm – Meets
SizeASTM F2421/F2055± 0.016 in. per linear footMeets
SquarenessASTM F2421/F20550.010 in. maximumMeets
Residual IndentationASTM F1914Average less than 8%Meets
Dimensional StabilityInternal≥ 0.018 in. per linear ft. MD
≥ 0.012 in. per lin. ft. AMD
Chemical ResistanceASTM F925No more than slight change in surface dulling, attack or stainingMeets
Resistance to HeatASTM F1514ΔE < 8Meets
Resistance to LightASTM F1515ΔE < 8Meets
Static Load Resistance @ 250ASTM F970< 0.005 in.Meets
Additional Testing
PerformanceTest MethodRequirementPerformance vs. Requirement
Static Load ResistanceASTM F970*< 0.005 in.2000 psi
Fire Test Data – Flame SpreadASTM E6480.45 W/cm2 or more Class 1Meets
Fire Test Data – Smoke EvolutionASTM E 662450 or lessMeets
 Fire Test Data – Canada CAN/ULC S-102.2 Use dependent20 mil/2.5 mm: Flame Spread – 5;
Smoke Developed – 75
12 mil/2.0 mm: Flame Spread – 0;
Smoke Developed – 50
ADA Standards for Accessible DesignChapter 3, Section 302.1Floor surfaces shall be stable, firm and slip resistantMeets
Static Coefficient of Friction**ASTM D2047/UL 410≥ 0.5Meets
*Testing at loads above 250 psi is outside the scope of the test method. Since testing is conducted on uninstalled flooring, results do not consider the performance of the adhesive, underlayment, or subfloor. These test results are not an indicator of the installed flooring system performance.

** Using the James Machine as described in D2047 and as directed in UL 410 for floor covering materials (FCM) using a leather foot under dry conditions. The application of site-applied floor sealers, polishes and other types of finishes routinely used to maintain resilient flooring materials will change the walking surface and consequently the SCOF value.

Recommended Applications

Interior Floors
(Standing water/
shower floors)
Full Lining
Water Line
Access Point 2.0 LVT
Access Point 2.5 LVT


Collection Test StructureSTCIICDelta IIC
20 mil/2.5 mm6″ Concrete Slab with S-1840 underlayment515322
12 mil/2.0 mm6″ Concrete Slab with S-1840 underlayment505424


FloorScore Certificates – Luxury Vinyl Tile


Resilient Sheet Flooring Products and Resilient Tile Flooring Products MIS


Location:All grade levels
System:Commercial Luxury Flooring Installation Instructions
Fitting:All Methods
Adhesives:S-995 Flooring Adhesive
S-1000 Set-In-Wet on all substrates
S-319 Dry-to-Touch over porous and nonporous substrates
Flip Spray Adhesive (residential installations only)
Acoustic Underlayment:S-1840 Quiet Comfort Luxury Flooring Underlayment
  • Armstrong Flooring S-1000 must be used in areas subject to direct sunlight, topical moisture, concentrated static and dynamic loads, temperature fluctuations and when installed over ceramic tile, terrazzo, marble, metal and polymeric (seamless) floors.
  • Same dye lot not required within an installation.
  • When installing planks, the end joints should be staggered a minimum of 6″ apart.
  • Can be installed over a single layer of existing resilient flooring.
  • Do not install over existing below-grade tile.

Care and Maintenance

Maintenance Recommendations:
Maintenance Recommendations For Commercial LVT

Maintenance Products:
Cleaner: Armstrong Flooring S-485
Polish: Armstrong Flooring S-480

Product Data Table

6″ x 48″ Items
12 mil/2.0 mm
6″ x 48″ Items
20 mil/2.5 mm
18“ x 18” Items
12 mil/2.0 mm
18“ x 18” Items
Tiles Per Carton18161816
Area Per Tile2 sq ft (0.19 sq m)2.25 sq ft (0.21 sq m)2 sq ft (0.19 sq m)2.25 sq ft (0.21 sq m)
Length48.6″ (123.6 cm)48.6″ (123.6 cm)18.7″ (47.6 cm)18.7″ (47.6 cm)
Width6.3″ (16 cm)6.3″ (16 cm)18.4″ (46.8 cm)18.4″ (46.8 cm)
Height2″ (5.1 cm)1.6″ (4 cm)1.9″ (4.9 cm)1.6″ (4 cm)
Coverage Per Carton36 sq ft (3.35 sq m)36 sq ft (3.35 sq m)36 sq ft (3.35 sq m)36 sq ft (3.35 sq m)
Carton Weight39 lbs (17.7 kg)29 lbs (13.2 kg)39 lbs (17.7 kg)29 lbs (13.2 kg)
6″ x 48″ Items
12 mil/2.0 mm
6″ x 48″ Items
20 mil/2.5 mm
18“ x 18” Items
12 mil/2.0 mm
18“ x 18” Items
Cartons Per Pallet54665664
Coverage Per Pallet1944 sq ft (180.9 sq m)2376 sq ft (221.1 sq m)2016 sq ft (187.6 sq m)2304 sq ft (214.4 sq m)
Access Point LVT 
20 mil/2.5 mm
Model Number (Suffix)
12 mil/2.0 mm
Model Number (Suffix)
SizeMulti-Purpose Trim
Length 94″

Stone Biscotti3P212 (821)
3P112 (821)
18″ x 18″NA924TRM
Hickory Caramel3P203 (641)
3P103 (641)
6″ x 48″U3031TRM
Rustic Oak Dunescape3P202 (641)
3P102 (641)
6″ x 48″NA180TRM
Oak Pewter 3P208 (641)
3P108 (641)
6″ x 48″D5003TRM
Walnut Fudge3P207 (641)
3P107 (641)
6″ x 48″U1051TRM
Rustic Oak Nightfall 3P201 (641)
3P101 (641)
6″ x 48″U3063TRM
Oak Sunrise3P206 (641)
3P106 (641)
6″ x 48″U1030TRM
Linen Flax3P210 (821)
3P110 (821)
18″ x 18″J5251TRM
Oak Sunset 3P204 (641)
3P104 (641)
6″ x 48″J5215TRM
Oak Silver 3P205 (641)
3P105 (641)
6″ x 48″J5216TRM
Linen Storm 3P209 (821)
3P109 (821)
18″ x 18″J5250TRM
Stone Thistle 3P211 (821)
3P111 (821)
18″ x 18″NA925TRM
Access Point LVT
20 mil/2.5 mm
Model Number (Suffix)
12 mil/2.0 mm
Model Number (Suffix)
SizeMulti-Purpose Trim
Length 94″


Updated on July 1, 2024

Article Attachments