Product Information
Traffic Type: Commercial
Overall Thickness: 2.5 mm (0.100″)
Wear Layer: 20 mil
Finish: Urethane with Diamond 10 Technology
Gloss: Low
Face Treatment: Embossed
Edge/End Treatment: Eased Edges/Eased Ends
Manufacturing Location: USA
Width x Length:
| 6″ x 36″ (15.3 cm x 91.4 cm) |
| 18″ x 18″ (45.7 cm x 45.7 cm) |
| 18″ x 36″ (45.7 cm x 91.4 cm) |
Warranty
20 Year Limited Commercial Warranty
Product Structure
- Diamond 10® Technology
Patented innovation that uses cultured diamonds to provide category-leading
scratch, stain, and scuff resistance from edge-to-edge - Rigid Wear Layer
The combination of Diamond 10® Technology and the unique rigid wear layer
results in enhanced durability and abrasion resistance - Realistic Printed Visual
- Foundation Layer
Product Features
- See the Coalesce collection at ArmstrongFlooring.com
- Designed for high traffic and heavy loads
- Diamond 10™ Technology Performance
- Low maintenance, no polish solution
- Keeps floors looking newer, longer
- Reduces life cycle costs
- Flexible maintenance options
- Low VOC emissions – California Section 01350 compliant, third-party FloorScore certification and LEED eligibility
MATERIAL: A tough, clear, unfilled polyurethane wear layer composed of polyvinyl chloride resins, plasticizers, stabilizers and processing aids on a filled vinyl backing.
PATTERN AND COLORS: The overall visuals are created by a print between the wear layer and intermediate color layer. The clear wear layer is embossed with different textures to enhance each of the printed visuals. Color pigments are insoluble in water and resistant to cleaning agents and light.
REFERENCE SPECIFICATION: ASTM F 1700, Class III, Type B – Embossed Surface
Testing
| Per ASTM F 1700 | |||
|---|---|---|---|
| Performance | Test Method | Requirement | Performance vs. Requirement |
| Thickness | ASTM F386 | Nominal ±0.005 in. | Meets |
| Wear Layer Thickness | ASTM F410 | 0.020 in. (0.5 mm) minimum for Commercial Use | Meets |
| Size | ASTM F2421 | ± 0.016 in. per linear foot | Meets |
| Squareness | ASTM F2421 | 0.010 in. maximum | Meets |
| Residual Indentation | ASTM F1914 | Average less than 8% | Meets |
| Chemical Resistance | ASTM F925 | No more than slight change in surface dulling, attack or staining | Meets |
| Resistance to Heat | ASTM F1514 | ΔE < 8 avg., max | Meets |
| Resistance to Light | ASTM F1515 | ΔE < 8 avg., max | Meets |
| Additional Testing | |||
|---|---|---|---|
| Performance | Test Method | Requirement | Performance vs. Requirement |
| Dimensional Stability | Internal | ≥ 0.018 in. per linear ft. MD ≥ 0.012 in. per lin. ft. AMD | Meets |
| Static Load Resistance | ASTM F970* | < 0.005 in. | 2000 psi |
| Fire Test Data – Flame Spread | ASTM E648 | 0.45 W/cm2 or more Class 1 | Meets |
| Fire Test Data – Smoke Evolution | ASTM E662 | 450 or less | Meets |
| Fire Test Data – Canada | CAN/ULC S-102.2 | Use dependent | Flame Spread – 5 Smoke Developed – 75 |
| ADA Standards for Accessible Design | Chapter 3, Section 302.1 | Floor surfaces shall be stable, firm and slip resistant | Meets |
| Static Coefficient of Friction** | ASTM D2047/UL 410 | ≥ 0.5 | Meets |
| Acoustics | ASTM E492 (IIC) ASTM E90 (STC) ASTM E2179 (DELTA IIC) | International Building Code (IIC ≥ 50) International Building Code (STC ≥ 50) Sound Transmission Reduction | 6 in. concrete, no ceiling with S-1840 Quiet Comfort Luxury Flooring Underlayment IIC – 53 STC – 51 Delta IIC – 22 |
** Using the James Machine as described in D2047 and as directed in UL 410 for floor covering materials (FCM) using a leather foot under dry conditions. The application of site-applied floor sealers, polishes and other types of finishes routinely used to maintain resilient flooring materials will change the walking surface and consequently the SCOF value.
Recommended Applications
Recommended Applications Chart – Luxury Vinyl Tile (LVT)
Sustainability
LEED Credit Information – Commercial
Sustainable Design Information
FloorScore Certificates – Luxury Vinyl Tile
Environmental Product Declaration (EPD) – Luxury Vinyl Tile
SDS
Resilient Sheet Flooring Products and Resilient Tile Flooring Products MIS
Installation
| Location: | All grade levels |
| System: | Commercial Luxury Flooring Installation Instructions |
| Fitting: | All Methods |
| Adhesives: | S-995 Flooring Adhesive S-1000 Set-In-Wet on all substrates S-319 Dry-To-Touch over porous and nonporous substrates |
| Acoustic Underlayment: | S-1840 Quiet Comfort Luxury Flooring Underlayment |
Installation Special Precautions and Recommendations:
- Refer to the Commercial Luxury Vinyl Tile Flooring Installation System for complete installation recommendations.
- Armstrong Flooring S-1000 must be used in areas subject to direct sunlight, topical moisture, concentrated static and dynamic loads, temperature fluctuations and when installed over ceramic tile, terrazzo, marble, metal and polymeric (seamless) floors.
- Same dye lot not required within an installation.
- When installing planks, the end joints should be staggered a minimum of 6″ apart.
- When installing rectangles, the tile can be installed in block/tile fashion or offset tile joints by one-half tile.
- Can be installed over a single layer of existing resilient flooring.
- Do not install over existing below-grade tile.
- Armstrong Flooring commercial flooring is used in many applications where it is subjected to heavy concentrated static and dynamic loads. For questions regarding product suitability and detailed instructions for floor preparation and installation in these types of applications, please contact AHF Products.
- We do not recommend the same SKU to be installed with different ending codes in the same space. Adjoining areas of the same SKU or multiple SKUs with different visuals may be mixed.
Care and Maintenance
Maintenance Recommendations:
Maintenance Recommendations For Commercial LVT
Maintenance Products:
Cleaner: Armstrong Flooring S-485
Polish: Armstrong Flooring S-480
Product Data Table
| CARTON PROPERTIES | 6″ x 36″ Items | 18″ x 18″ Items | 18“ x 36” Items |
| Tiles Per Carton | 24 | 16 | 12 |
| Area Per Tile | 1.5 sq ft | 2.25 sq ft | 4.5 sq ft |
| Length | 36.7″ (93.3 cm) | 18.7″ (47.6 cm) | 36.6″ (93 cm) |
| Width | 6.4″ (16.3 cm) | 18.4″ (46.8 cm) | 18.3″ (46.5 cm) |
| Height | 2.7″ (6.9 cm) | 1.9″ (4.9 cm) | 1.4″ (3.5 cm) |
| Coverage Per Carton | 36 sq ft (3.35 sq m) | 36 sq ft (3.35 sq m) | 54 sq ft (5.02 sq m) |
| Carton Weight | 39 lbs (17.7 kg) | 39 lbs (17.7 kg) | 55.8 lbs (25.3 kg) |
| PALLET PROPERTIES | 6″ x 36″ Items | 18″ x 18″ Items | 18“ x 36” Items |
| Cartons Per Pallet | 54 | 36 | 32 |
| Coverage Per Pallet | 1944 sq ft (180.9 sq m) | 1620 sq ft (150.48 sq m) | 1728 sq ft (271.08 sq m) |
| Coalesce Pattern Name | Color | Pattern Number | Suffix | Size |
| Decima | Tweed | ST851 | 611 | 6″ x 36″ |
| Decima | Ravenna | ST852 | 611 | 6″ x 36″ |
| Decima | Valerie | ST854 | 611 | 6″ x 36″ |
| Decima | Silverdust | ST855 | 611 | 6″ x 36″ |
| Decima | Cashmere | ST856 | 611 | 6″ x 36″ |
| Nona | Ravenna | ST776 | 821 | 18″ x 18″ |
| Nona | Tweed | ST796 | 821 | 18″ x 18″ |
| Nona | Valerie | ST797 | 821 | 18″ x 18″ |
| Nona | Silverdust | ST798 | 821 | 18″ x 18″ |
| Nona | Cashmere | ST799 | 821 | 18″ x 18″ |
| Atro | Tweed | ST891 | 821 | 18″ x 18″ |
| Atro | Ravenna | ST892 | 821 | 18″ x 18″ |
| Atro | Valerie | ST894 | 821 | 18″ x 18″ |
| Atro | Silverdust | ST895 | 821 | 18″ x 18″ |
| Atro | Cashmere | ST896 | 821 | 18″ x 18″ |
| Coalesce Pattern Name | Color | Pattern Number | Suffix | Size |
| Geome | Calcite | ST830 | 811 | 18″ x 36″ |
| Geome | Sulphur | ST831 | 811 | 18″ x 36″ |
| Geome | Dolomite | ST832 | 811 | 18″ x 36″ |
| Geome | Azure | ST833 | 811 | 18″ x 36″ |
| Geome | Slate | ST834 | 811 | 18″ x 36″ |
| Geome | Obsidian | ST835 | 811 | 18″ x 36″ |
| Oxidize | Tin | ST881 | 811 | 18″ x 36″ |
| Oxidize | Vanta | ST882 | 811 | 18″ x 36″ |
| Oxidize | Platinum | ST883 | 811 | 18″ x 36″ |
| Oxidize | Rhodium | ST884 | 811 | 18″ x 36″ |
| Oxidize | Uranium | ST885 | 811 | 18″ x 36″ |
| Coalesce Pattern Name | Color | Pattern Number | Suffix | Size |