Product Information
Traffic Type: Commercial
Overall/Wear Layer Thickness: 1/8″ (3.2 mm)
Length x Width: 12″ x 12″ (30.5 cm x 30.5 cm)
Finish: Fast Start® (polish required before traffic)
Face Treatment: Traditional Smooth
Edge Treatment: Square Edges
Manufacturing Location: USA
Warranty
5 Year Commercial Limited Warranty
Product Structure
Product Features
See the Iliad collection at AHFContract.com
Classic VCT – Durable with Immortal Beauty
ILIAD draws inspiration from the cultural treasures of ancient Greece. Echoing the definition of “classic” as a benchmark of high quality. Fresh visuals pay homage to the immortal beauty of ancient poetry that resonates through the millennia – a visual poem of hand-crafted surfaces, where every tile is a verse.
MATERIAL: A composition of polyvinyl chloride resin, plasticizers, stabilizers, fillers, and pigments.
CONSTRUCTION AND COLORS: Color and pattern are dispersed throughout the thickness of the material. Color pigments are insoluble in water and resistant to cleaning agents and light.
NOTE: Darker-colored patterns may be susceptible to scratch whitening.
GLOSS: (typical value) 60° specular: 20-40 Light Reflectivity Chart: CLICK HERE.
REFERENCE SPECIFICATIONS:
ASTM F 1066 Vinyl Composition Floor Tile, Class 2 – through pattern
Testing
Flame and Smoke Test Reports – Vinyl Composition Tile (VCT)
| Per ASTM F 1066 | |||
|---|---|---|---|
| Performance | Test Method | Requirement | Performance vs. Requirement |
| Thickness | ASTM F386 | Nominal ± 0.005 in. | Meets |
| Size | ASTM F2055 | ± 0.016 in. per linear foot | Meets |
| Squareness | ASTM F2055 | 0.010 in. max | Meets |
| Indentation – One Minute | ASTM F1914 | ≥ 0.006 in. to ≤ 0.015 in. | Meets |
| Indentation @ 115°F | ASTM F1914 | < 0.032 in. | Meets |
| Impact | ASTM F1265 | No cracks beyond limit | Meets |
| Deflection | ASTM F1304 | 1.0 in. minimum | Meets |
| Dimensional Stability | ASTM F2199 | ≤ 0.024 in. per linear foot | Meets |
| Chemical Resistance | ASTM F925 | No more than slight change in surface dulling, attack or staining | Meets |
| Resistance to Heat | ASTM F1514 | ΔE < 8.0 | Meets |
| Additional Testing | |||
|---|---|---|---|
| Performance | Test Method | Requirement | Performance vs. Requirement |
| Static Load Resistance | ASTM F970* | ≤ 0.005 in. | 2000 psi |
| Fire Test Data – Flame Spread | ASTM E648 | 0.45 W/cm2 or more Class 1 | Meets |
| Fire Test Data – Smoke Evolution | ASTM E662 | 450 or less | Meets |
| ADA Standards for Accessible Design | Chapter 3 Section 302.1 | Floor surfaces shall be stable, firm and slip-resistant | Meets |
| Static Coefficient of Friction** | ASTM D 2047/ UL 410 | ≥ 0.5 | Meets |
**Using the James Machine as described in D2047 and as directed in UL 410 for floor covering materials (FCM) using a leather foot under dry conditions. The application of site-applied floor sealers, polishes and other types of finishes routinely used to maintain resilient flooring materials will change the walking surface and consequently the SCOF value.
Recommended Applications
Recommended Applications Chart – Vinyl Composition Tile
Guide Specification
Guide Specifications – Vinyl Composition Tile
Sustainability
FloorScore Certificates – Vinyl Composition Tile
SDS
Vinyl Composition Tile (VCT) MIS
Installation
| Location: | All grade levels |
| System: | Commercial Tile Installation System |
| Fitting: | Tile cutter, straight scribe, hot knife |
| Adhesives: | S-515 S-319 S-1000 Flip Spray Adhesive |
Installation Special Precautions and Recommendations:
- Do not install over existing below-grade tile.
- Pattern and Shade/Lot Numbers should match.
Care and Maintenance
Maintenance Recommendations:
Commercial Care & Maintenance Instructions for VCT
Vinyl Composition Tile (VCT) Installed in Your Home – Maintenance Recommendations
Maintenance Products:
Cleaner: Armstrong Flooring S-485
Polish: Armstrong Flooring S-480
Product Data Table
| CARTON PROPERTIES | |
| Length | 12.4″ (31.5 cm) |
| Width | 12.4″ (31.5 cm) |
| Height | 6″ (15.2 cm) |
| Coverage Per Carton | 45 sq ft (4.18 sq m) |
| Carton Weight | 63 lbs (28.6 kg) |
| PALLET PROPERTIES | |
| Cartons Per Pallet | 24 |
| Coverage Per Pallet | 1080 sq ft (100.32 sq m) |
| Iliad Color | Model Number | Suffix |
| Dynastic White | CR001 | 031 |
| Glorious Beige | CR002 | 031 |
| Sovereign Gray | CR003 | 031 |
| Royal Silver | CR004 | 031 |
| Falcon Gray | CR005 | 031 |
| Imperial Black | CR006 | 031 |
| Ermine White | CR007 | 031 |
| Crystal Gray | CR008 | 031 |
| Dominant Gray | CR009 | 031 |
| Triumphal Gray | CR010 | 031 |
| Citadel Gold | CR011 | 031 |
| Glowing Light | CR012 | 031 |
| Victorious Beige | CR013 | 031 |
| Valor Green | CR014 | 031 |
| Noble Blue | CR015 | 031 |
| Regal Linen | CR016 | 031 |
| Hunt Passion | CR017 | 031 |
| Queen Bliss | CR018 | 031 |
| Leisure Green | CR019 | 031 |
| Porcelain Blue | CR020 | 031 |
| Iliad Color | Model Number | Suffix |