Armstrong Flooring S-466 Patch Strong SDS Brand: Armstrong Flooring Product Type: Installation Products Product Name: S-466 Patch Strong Attached PDF File: See Attachment Below
Armstrong Flooring S-466 Patch Strong™ Patching and Smoothing Compound DATA SHEET Precautions: FOR PROFESSIONAL USE ONLY This product is not a vapor barrier. Where concrete moisture exceeds the maximum allowed, address...
Polymeric Poured Floors, Metal, Ceramic Tile, Quarry Tile, Terrazzo and Marble For Installations of Armstrong Flooring Products NOTE: The responsibility for determining if the existing poured-on floor is well-bonded to the concrete, and is not textured enough...
Armstrong Flooring S-463 Level Strong™ Self Leveling Underlayment DATA SHEET Precautions FOR PROFESSIONAL USE ONLY Honor all designed movement joints in the concrete subfloor up through S-463 Level Strong™ and...
Residual Adhesives on Concrete Slabs to Receive Resilient Flooring For Installations of Armstrong Flooring Products Precautions Some previously manufactured asphaltic “cutback” adhesives contained asbestos. For removal instructions, refer to the Resilient Floor Covering Institute’s publication...
Armstrong Flooring S-1840 Quiet Comfort Luxury Flooring Underlayment DATA SHEET For Use With Commercial Luxury Vinyl Tile Flooring Installation System Residential LVT Planks Installation System Not for use in areas...
Armstrong Flooring S-464 Prime Strong™ Porous DATA SHEET Precautions: FOR PROFESSIONAL USE ONLY Do not install below 50oF (10oC) surface or air temperature. Close container after each use....
Armstrong Flooring S-462 Seal Strong 2 Part Moisture Mitigation System DATA SHEET Precautions: FOR PROFESSIONAL USE ONLY KEEP OUT OF REACH OF CHILDREN. Do not get in eyes, on skin, or on...
Armstrong Flooring S-465 NP Prime Strong SDS Brand: Armstrong Flooring Product Type: Installation Products Product Name: S-465 Prime Strong Attached PDF File: See Attachment Below
Armstrong Flooring S-465 NP Prime Strong™ Non-Porous DATA SHEET Precautions: FOR PROFESSIONAL USE ONLY Do not install below 50°F (10°C) surface or air temperature. Close container after each use....