Product Information
Traffic Type: Commercial
Overall/Wear Layer Thickness: 1/8″ (3.2 mm)
Length x Width: 12″ x 12″ (30.5 cm x 30.5 cm)
Finish: Fast Start® (polish required before traffic)
Face Treatment: Traditional Smooth
Edge Treatment: Square Edges
Manufacturing Location: USA
Warranty
5 Year Commercial Limited Warranty
Product Structure
Product Features
Non-directional tone on tone VCT providing a monolithic visual with a palette of colors ranging from sophisticated classics to fresh pop colors.
With through-color and pattern for high durability plus abrasion and gouge resistance, Highlights is a popular choice for a variety of commercial applications that receive a lot of foot traffic or heavy use.
MATERIAL: A composition of polyvinyl chloride resin, plasticizers, stabilizers, fillers, and pigments.
CONSTRUCTION AND COLORS: Color and pattern detail are dispersed uniformly throughout the thickness of the material. Color pigments are insoluble in water and resistant to cleaning agents and light.
NOTE: Darker-colored patterns may be susceptible to scratch whitening.
GLOSS: (typical value) 60° specular: 20-40 Light Reflectivity Chart: CLICK HERE.
REFERENCE SPECIFICATIONS:
ASTM F 1066 Vinyl Composition Floor Tile, Class 2 – through pattern
Testing
| Per ASTM F 1066 | |||
|---|---|---|---|
| Performance | Test Method | Requirement | Performance vs. Requirement |
| Thickness | ASTM F386 | Nominal ± 0.005 in. | Meets |
| Size | ASTM F2055 | ± 0.016 in. per linear foot | Meets |
| Squareness | ASTM F2055 | 0.010 in. max | Meets |
| Indentation – One Minute | ASTM F1914 | ≥ 0.006 in. to ≤ 0.015 in. | Meets |
| Indentation @ 115°F | ASTM F1914 | < 0.032 in. | Meets |
| Impact | ASTM F1265 | No cracks beyond limit | Meets |
| Deflection | ASTM F1304 | 1.0 in. minimum | Meets |
| Dimensional Stability | ASTM F2199 | ≤ 0.024 in. per linear foot | Meets |
| Chemical Resistance | ASTM F925 | No more than slight change in surface dulling, attack or staining | Meets |
| Resistance to Heat | ASTM F1514 | ΔE < 8.0 | Meets |
| Additional Testing | |||
|---|---|---|---|
| Performance | Test Method | Requirement | Performance vs. Requirement |
| Static Load Resistance | ASTM F970* | < 0.005 in. | 2000 psi |
| Fire Test Data – Flame Spread | ASTM E648 | 0.45 W/cm2 or more Class 1 | Meets |
| Fire Test Data – Smoke Evolution | ASTM E662 | 450 or less | Meets |
| Fire Test Data – Canada | CAN\ULC S102.2 | Use dependent | Flame Spread – 0 Smoke Developed – 30 |
| ADA Standards for Accessible Design | Chapter 3 Section 302.1 | Floor surfaces shall be stable, firm and slip-resistant | Meets |
| Static Coefficient of Friction** | ASTM D 2047/ UL 410 | ≥ 0.5 | Meets |
**Using the James Machine as described in D2047 and as directed in UL 410 for floor covering materials (FCM) using a leather foot under dry conditions. The application of site-applied floor sealers, polishes and other types of finishes routinely used to maintain resilient flooring materials will change the walking surface and consequently the SCOF value.
Sustainability
FloorScore Certificates – Vinyl Composition Tile
SDS
Resilient Sheet Flooring Products and Resilient Tile Flooring Products MIS
Installation
| Location: | All grade levels |
| System: | Commercial Tile Installation System |
| Fitting: | Tile cutter, straight scribe, hot knife |
| Adhesives: | S-515 S-319 S-1000 Flip Spray Adhesive |
Installation Special Precautions and Recommendations:
- Do not install over existing below-grade tile.
- Pattern and Shade/Lot Numbers should match.
Care and Maintenance
Maintenance Recommendations:
Commercial Care & Maintenance Instructions for VCT
Vinyl Composition Tile (VCT) Installed in Your Home – Maintenance Recommendations
Maintenance Products:
Cleaner: Armstrong Flooring S-485
Polish: Armstrong Flooring S-480
Product Data Table
| CARTON PROPERTIES | |
| Length | 12.4″ (31.5 cm) |
| Width | 12.4″ (31.5 cm) |
| Height | 6″ (15.2 cm) |
| Coverage Per Carton | 45 sq ft (4.18 sq m) |
| Carton Weight | 63 lbs (28.6 kg) |
| PALLET PROPERTIES | |
| Cartons Per Pallet | 24 |
| Coverage Per Pallet | 1080 sq ft (100.32 sq m) |
| Highlights Color | Model Number | Suffix |
| Blue Sapphire | HR001 | 031 |
| Corinthian Cobalt | HR002 | 031 |
| Santorini Blue | HR003 | 031 |
| Coast Azure | HR004 | 031 |
| Mediterranean Blue | HR005 | 031 |
| Blue Mosaic | HR006 | 031 |
| Delphi Fog | HR007 | 031 |
| Parthenon Pine | HR008 | 031 |
| Elysian Green | HR009 | 031 |
| Demeter Apple | HR010 | 031 |
| Green Olive | HR011 | 031 |
| Grecian Meadow | HR012 | 031 |
| Ithaca Waters | HR013 | 031 |
| Delicate Glow | HR014 | 031 |
| Olympian Gold | HR015 | 031 |
| Acropolis Apricot | HR016 | 031 |
| Helios Hot | HR017 | 031 |
| Acropolis Red | HR018 | 031 |
| Vermilion Flame | HR019 | 031 |
| Gaia Garnet | HR020 | 031 |
| Terra Clay | HR021 | 031 |
| Phoenix Plum | HR022 | 031 |
| Bacchus Wine | HR023 | 031 |
| Amethyst Charm | HR024 | 031 |
| Aphrodite’s Kiss | HR025 | 031 |
| Highlights Color | Model Number | Suffix |