Armstrong Flooring MedinPure with Diamond 10 Technology PVC-Free Homogeneous Sheet DATA SHEET

Product Information

Traffic Type: Commercial
Gauge: .080″ (2.0 mm)
Roll Length: 59.1′ – 75.5′ (18 – 23 m)
Roll Width: 78.7″ (2 m)
Wear Layer: .080″ (2.0 mm)
Coverage Per Roll: 43.1 – 55 sq yd (36 – 46 sq m) (387.6 – 495.2 sq ft)
Shipping Weight: 265.9 – 339.4 lbs per roll (120.6 – 153.9 kg)
Rolls Per Pallet: N/A
Finish: Urethane with Diamond 10 Technology 
Manufacturing Location: China

Warranty

10 Year Commercial Limited Warranty

Product Structure

  1. Diamond 10® Technology
  2. Through Pattern Wear Layer

Product Features

MedinPure with Diamond 10 Technology coating is a PVC-free alternative that integrates science, technology, and design to advance quality of care in healing environments. Its formulation is shaping the future of resilient flooring – and empowers you with a new choice for impactful healthcare design.

Building Better
MedinPure reflects our focus on innovation and the development of products that enhance quality of life. We share your commitment to transparency and building a better environment together. MedinPure is free of plasticizers, ortho-phthalates, halogens, isocyanates, and Red List Chemicals of Concern.

Diamond 10® Technology with Enhanced Traction
Diamond 10® Technology is a no-polish, low-maintenance solution made with cultured diamonds that offers category-leading scratch, stain, scuff – and now – slip resistance. MedinPure provides enhanced traction for an added measure of safety where it matters most. It achieves an R10 Rating per standard DIN 51130.

Testing

Resistance to Staining – Commercial Resilient Flooring
Light Reflectivity Values

Per ASTM F 1913*
PerformanceTest MethodRequirementPerformance vs Requirement
ThicknessASTM F386≥ 0.075 inMeets
Residual IndentationASTM F1914≤ 0.007 in.Meets
Static Load Resistance @ 250 psi ASTM F970≤ 0.005˝Meets
FlexibilityASTM F1371 ½ in. mandrel no cracks or breaks in wear surfaceMeets
Resistance to ChemicalsASTM F925No more than slight change in surface dulling, attack or stainingMeets
Resistance to HeatASTM F1514∆E < 8Meets
Resistance to LightASTM F1515ΔE < 8Meets
*Performance requirements only; product is free of halogens, including chlorine (PVC), fluorine, bromine, iodine.
EN 14565 and ISO 10581*
Overall ThicknessISO 24346Nominal value +0.13 mm /-0.10 mmMeets
Mass per unit areaISO 23997+13% / -10%Meets
Residual IndentationISO 24343-1≤ 0.10 mmMeets
Dimensional StabilityISO 23999≤ 0.20% expansion/shrinkage | ≤ 8 mm curlingMeets
FlexibilityISO 24344, Method A20 mm mandrelMeets
Color fastness to artificial lightISO 105-B02, Method 36 minimumMeets
Seam StrengthEN 684Average ≥ 240 N/50 mmMeets
*Performance requirements only; product is free of halogens, including chlorine (PVC), fluorine, bromine, iodine.
Additional Testing
PerformanceTest MethodRequirementPerformance vs Requirement
Fire Test Data – Flame SpreadASTM E6480.45 W/cm2 or more Class 1Meets
Fire Test Data – Smoke EvolutionASTM E662450 or lessMeets
Fire Test Data – CanadaCAN\ULC S-102.2Use dependentFlame Spread – 70
Smoke Developed – 245
Static Load ResistanceASTM F970**< 0.005Information Coming Soon
Wear Group Classification per
EN649-volume loss
EN 660-2Wear Group T ≤ 2.0 mm3
Bacteria ResistanceISO 846: PART CNo Observed Growth
Ramp TestDIN 51130R10
Isocyanate ContentISO 14896None Detected
ADA Standards for
Accessible Design
CHAPTER 3
SECTION 302.1
Floor surfaces shall be stable, firm and slip-resistantMeets
Antistatic PropertiesEN 1815≤ 2.0 kVMeets (antistatic)
Static Coefficient of Friction***ASTM D2047/UL 410≥ 0.6Meets
**Testing at loads above 250 psi is outside the scope of the test method. Since testing is
conducted on uninstalled flooring, results do not consider the performance of the adhesive, underlayment, or subfloor. These test results are not an indicator of the installed flooring system performance.


***Using the James Machine as described in D2047 and as directed in UL 410 for floor covering materials (FCM) using a leather foot under dry conditions. The application of site-applied floor sealers, polishes and other types of finishes routinely used to maintain resilient flooring materials will change the walking surface and consequently the SCOF value.

Recommended Applications

Recommended Applications Chart – Commercial Sheet

Guide Specification

Guide Specifications – Commercial Sheet

Sustainability

Free of Plasticizers, Ortho-Phthalates, Halogens, Isocyanates and Red List Chemicals of Concern.

FloorScore Certificate – Sheet Flooring
LEED and WELL for Sheet Flooring

Carbon FootprintMedinPure
Global Warming Potential, excluding Biogenic Carbon1.34 Kg C02 eq. / square foot
Raw Materials (A1) through Production (A3)(14.44 Kg C02 eq. / square meter)

SDS

Material Information Sheet

Care and Maintenance

Maintenance Recommendations:
Maintenance Recommendations For Commercial Sheet

Maintenance Products:
Cleaner: Armstrong Flooring S-485
Polish: Armstrong Flooring S-480

Product Data Table

MedinPure
Model Number
ColorPVC-Free
Weld Rod
Coordinating
Wall Base
H3001CoconutWF301Salt
H3002White RocksWF302Salt
H3003Coffee LatteWF303Parchment
H3004Crème BruleeWF304Parchment
H3005Hot SandWF305Coastal Green
H3006At the PoolWF306Salt
H3007Cool DayWF307Greige
H3008Dawn GrayWF308Greige
H3009Silver QueenWF309Greige
H3010Gray AngelWF310Pebble
H3011Springtime GreenWF311Salt
H3012SpearmintWF312Salt
H3013Smokey JadeWF313Greige
H3014RosemaryWF314Greige
H3015Sage DreamWF315Greige
H3016IcebergWF316Salt
H3017GlacierWF317Greige
H3018Blue PowderWF318Greige
H3019GrottoWF319Salt
H3020Blue TealWF320Stonewash
MedinPure
Model Number
ColorPVC-Free
Weld Rod
Coordinating
Wall Base
Updated on January 12, 2024

Article Attachments